The BR9080 and BR9016 series are serial EEPROMs that can be connected directly to a serial port and can be erased and written electrically. Writing and reading is performed in word units, using four types of operation commands. Communication occurs though CS, SK, DI, and DO pins, WC pin control is used to initiate a write disabled state, enabling these EEPROMs to be used as one-time ROMs. During writing, operation is checked via the internal status check.

Features

1) BR9080 / F / RFV (8k bit): 512 words ×16 bits

BR9016 / F / RFV (16k bit): 1024 words × 16bits

2) Single power supply operation

3) Serial data input and output

4) Automatic erase-before-write

5) Low current consumption

Active (5V) : 5mA (max.)

Standby (5V) : 3µA (max.)

6) Noise filter built into SK pin

7) Write protection when VCC is low

8) Compact DIP8 / SOP8 / SSOP-B8 packages

9) High reliability CMOS process

10) 100,000 ERASE / WRITE cycles

11) 10 years Data Retention

Applications

Movie, camera, cordless telephones, car stereos, VCRs, TVs, DIP switches, and other battery-powered equipment requiring low voltage and low current