• Two differential full-bridge sensor element

measurements

• One internal chip temperature measurement

• Two external Diode temperature measurements

• Digital compensation for offset, gain, and higher

order nonlinearity as well as temperature

coefficients of the differential sensor element

input signals

• Optional channel 1 – channel 2 difference output

• Operating temperature range: -40°C to 150°C

• Accuracy as high as ±0.50% full scale at -40°C to

150°C (see the electrical characteristics table for

conditions)

• NVM memory for configuration, calibration data,

and configurable measurement and conditioning

functionality

• SENT output compliant to SAE J2716 JAN2010

(SENT Rev. 3) and APR2016 (SENT Rev. 4)

standards

• Supports output of one or more sensor signals

and product identification via a single SENT

interface connection

• Configurable for nearly all resistive bridge

sensors

• One-pass, end-of-line calibration algorithm

minimizes production costs

• No external trimming or components required

• Qualified according to AEC-Q100 Grade 0

• Supply voltage: 4.75V to 5.25V

• Over-voltage and reverse polarity protection up to ±18V

• Bridge sensor input span: 1mV/V to 800mV/V

• Bridge sensor signal ADC resolution: 14 to 18 bit

• Output resolution: 12-bit via SENT interface

• Enhanced diagnostic features for sensor module

• Package: 24-QFN (4  4 mm; wettable flanks),

16-TSSOP (4.4  5 mm, exposed pad)