FEATURES

• Low VCC detection and reset assertion

—Five standard reset threshold voltages

—Re-program low VCC reset threshold voltage

using special programming sequence

—Reset signal valid to VCC = 1V

• Long battery life with low power consumption

—<50μA max standby current, watchdog on

—<1μA max standby current, watchdog off

—<400μA max active current during read

• 64Kbits of EEPROM

• Built-in inadvertent write protection

—Power-up/power-down protection circuitry

—Protect 0, 1/4, 1/2 or all of EEPROM array with

Block Lock™ protection

—In circuit programmable ROM mode

• 2MHz SPI interface modes (0,0 & 1,1)

• Minimize EEPROM programming time

—32-byte page write mode

—Self-timed write cycle

—5ms write cycle time (typical)

• 2.7V to 5.5V and 4.5V to 5.5V power supply

operation

• Available packages

—14-lead SOIC, 8-lead PDIP