Features

 Compliant with Universal Serial Bus 3.0 Specification Revision 1.0, which is released by USB

Implementers Forum, Inc

- Supports the following speed data rates as follows: Low-speed (1.5 Mbps) / Full-speed (12

Mbps) / High-speed (480 Mbps) / Superspeed (5 Gbps)

- Supports USB 3.0 link power management (U0/U1/U2/U3)

- Supports USB 2.0 link power management (LPM: L0/L1/L2/L3)

 Configurable downstream port counts of 2, 3, or 4 ports

 Supports all VBUS control options

- Individual or global over-current detection

- Individual or ganged power control

 Supports USB 3.0/2.0 Compound (non-removable) devices by I/O pin configuration

 Supports clock output (24/12 MHz) for Compound (non-removal) device on downstream ports

 Supports Energy Star and EuP specifications for low-power PC peripheral system

 Single 5 V Power Supply

- On chip LDO for 3.3 V from 5 V input and Switching Regulator for 1.05 V from 5 V input

 System clock: 24 MHz Crystal or Oscillator

 Supports USB Battery Charging Specification Revision 1.2 and other portable devices

- DCP mode of BC 1.2

- CDP mode of BC 1.2

- China Mobile Phone Chargers

- EU Mobile Phone Chargers

- Apple iOS products

- Other major portable devices

 Supports SPI ROM for optional firmware and parameter data

 Small Footprint

- Small and low pin count package with simple pin assignment for PCB layout

- Integration of many peripheral components

- Direct routing of all USB signal traces to connector pins using one layer of the PCB

 Self/Bus-Powered modes can be set by pin strapping

 Integrated termination resistors for USB

 Provides SUSPEND status output

 Supports Port Indicator control (only Green color)