DESCRIPTION

ERTEC 200 is a powerful communication block for development of industrial Ethernet devices. ERTEC

200 contains a 32-bit RISC processor, an external memory interface with SDRAM and SRAM controller, an LBU interface, a 2-channel real-time Ethernet interface with integrated PHYs, synchronous and

asynchronous serial ports, and general purpose I/Os. Its robust construction, specific automation functions, and openness to the IT world are distinguishing features. The ERTEC 200 is housed in a 304-pin

plastic FBGA package (19 mm × 19 mm).

FEATURES

• ARM946E-S core with max. 150 MHz

- 8 kBytes of instruction cache

- 4 kBytes of data cache

- 4 kBytes of D-TCM

- Memory protection unit

- On-chip debug and trace functionality via

JTAG interface

- ETM9 embedded trace macrocell

- Interrupt controller for 16 IRQs and 8 FIQs

• Internal Multilayer AHB bus running at 50 MHz

• External memory interface (EMIF) supports up

to 128 MBytes of SDRAM and up to 64 MBytes

for static memories and I/O with 4 chip selects

• Single-channel DMA controller for high-speed

memory-to-memory transfers and for serial

interface support

• Integrated PLL to generate internal clocks for

ARM946E-S, AHB, APB and IRT switch

• Predefined Boot ROM content supporting

different download sources

• Local bus unit (LBU) with 16-bit data bus to

connect external host with access to internal

ERTEC 200 resources

• IRT switch block with 2 Ethernet ports

(10/100 Mbps) supporting RT and IRT traffic

- integrated Ethernet PHYs

- autonegotiation, broadcast filter

- 64 kBytes internal communication SRAM

• one UART (16550 like) and one SPI interface

• two 32-bit timers with prescaler, one 16-bit

timer, one 32-bit F-timer and two watchdog

timers

• Max. 45 GPIOs, partly usable as interrupts

- Max. 32 GPIOs, if LBU interface is used

• Various configuration options selectable during

reset

• 1.5 V (logic) and 3.3 V (I/O) power supply

• Temperature range: TA = -40 to 85°C

• Compact 304-pin plastic FBGA package