Features

▪ Single 1.7 V - 2.0 V Supply

▪ 64-Mbit (8 x 8 Mbit) Flash Memory

▪ Serial Peripheral Interface (SPI) and Quad Peripheral Interface (QPI) compatible

• Supports SPI Modes 0 and 3

• Supports Dual Output Read and Quad I/O program and read

• Supports QPI program and read

• 133 MHz maximum operating frequency

• Clock-to-Output (tV1) of 6 ns

• Up tp 66 MB/s continuous data transfer rate

▪ Quad enabled (factory default setting: see Section 7.7)

▪ Full chip erase

▪ Flexible, optimized erase architecture for code and data storage applications

• 0.6 ms typical Page Program (256 Bytes) time

• 60 ms typical 4-kByte Block Erase time

• 200 ms typical 32-kByte Block Erase time

• 350 ms typical 64-kByte Block Erase time

▪ Hardware controlled locking of Status registers via WP pin

▪ 4-kbit secured One-Time Programmable (OTP) security register

▪ Hardware write protection

▪ Serial Flash Discoverable Parameters (SFDP) register

▪ Flexible programming

• Byte/page program (1 to 256 Bytes)

• Dual or quad input byte/page program (1 to 256 Bytes)

▪ Erase/program suspend and resume

▪ JEDEC standard manufacturer and device ID read methodology

▪ Low power dissipation

• 2 µA Deep Power-Down (DPD) current (typical)

• 10 µA Standby current (typical)

• 5 mA Active read current (typical)

▪ Endurance: 100,000 program/erase cycles (4-kB, 32-kB, or 64-kB blocks)

▪ Data Retention: 20 years

▪ Industrial temperature range: -40 °C to +85 °C

▪ Industry standard green (Pb/Halide-free/RoHS compliant) package options

• 8-pad DFN (6 x 5 x 0.6 mm)

• 8-ball WLCSP (dBGA)