General description

The ADC1213D is a dual-channel 12-bit Analog-to-Digital Converter (ADC) optimized for

high dynamic performance and low power at sample rates up to 125 Msps. Pipelined

architecture and output error correction ensure the ADC1213D is accurate enough to

guarantee zero missing codes over the entire operating range. Supplied from a 3 V

source for analog and a 1.8 V source for the output driver, it embeds two serial outputs.

Each lane is differential and complies with the JESD204A standard. An integrated Serial

Peripheral Interface (SPI) allows the user to easily configure the ADC. A set of IC

configurations is also available via the binary level control pins taken, which are used at

power-up. The device also includes a programmable full-scale SPI to allow flexible input

voltage range of 1 V to 2 V (peak-to-peak).

Excellent dynamic performance is maintained from the baseband to input frequencies of

170 MHz or more, making the ADC1213D ideal for use in communications, imaging, and

medical applications.

Features and benefits

 SNR, 70 dBFS; SFDR, 86 dBc  Input bandwidth, 600 MHz

 Sample rate up to 125 Msps  Power dissipation, 995 mW at 80 Msps

 Clock input divided by 2 for less jitter

contribution

 SPI register programming

 3 V, 1.8 V single supplies  Duty cycle stabilizer (DCS)

 Flexible input voltage range:

1 V (p-p) to 2 V (p-p)

 High IF capability

 Two configurable serial outputs  Offset binary, two’s complement, gray

code

 Compliant with JESD204A serial

transmission standard

 Power-down mode and Sleep mode

 Pin compatible with the

ADC1613D series, ADC1413D series,

and ADC1113D125

 HVQFN56 package