Description

The 5P1103 is a programmable fanout buffer intended for

high performance consumer, networking, industrial,

computing, and data-communications applications.

Configurations may be stored in on-chip One-Time

Programmable (OTP) memory or changed using I2C

interface.

The outputs are generated from a single reference clock. The

input reference can be crystal, external single-ended or

differential clock. The reference clock can come from one of

the two redundant clock inputs and is selected by CLKSEL

pin. A glitchless manual switchover function allows one of the

redundant clocks to be selected during normal operation. See

reference clock input section for details.

Two select pins allow up to 4 different configurations to be

programmed and accessible using processor GPIOs or

bootstrapping. The different selections may be used for

different operating modes (full function, partial function, partial

power-down), regional standards (US, Japan, Europe) or

system production margin testing.

The device may be configured to use one of two I2C

addresses to allow multiple devices to be used in a system.

Features

• Up to two high performance universal differential output

pairs

• Low RMS additive phase jitter: 0.2ps

• Four banks of internal non-volatile in-system

programmable or factory programmable OTP memory

• I

2C serial programming interface

• One additional LVCMOS output clock

• Two universal output pairs:

• Each configurable as one differential output pair or

two LVCMOS outputs

• I/O Standards:

• Single-ended I/Os: 1.8V to 3.3V LVCMOS

• Differential I/Os - LVPECL, LVDS and HCSL

• Input frequency ranges:

• LVCMOS Reference Clock Input (XIN/REF) – 1MHz to

200MHz

• LVDS, LVPECL, HCSL Differential Clock Input

(CLKIN, CLKINB) – 1MHz to 350MHz

• Crystal frequency range: 8MHz to 40MHz

• Individually selectable output voltage (1.8V, 2.5V, 3.3V) for

each output pair

• Redundant clock inputs with manual switchover

• Programmable crystal load capacitance

• Individual output enable/disable

• Power-down mode

• 1.8V, 2.5V or 3.3V core VDDD, VDDA

• Available in 24-pin VFQFPN 4mm x 4mm package

• -40° to +85°C industrial temperature operation