Single-Chip 9-Port 10/100Mbps Ethernet Switch Controller

The RTL8309M-CG is a 9-port 10/100M Ethernet switch controller that integrates memory, nine MACs, and eight physical layer transceivers for 10Base-T and 100Base-TX operation into a single chip. It supports a (T)MII/RMII interface for external devices to connect to the 9th MAC. The external device co

SINGLE-CHIP 9-PORT 10/100M ETHERNET SWITCH CONTROLLER

The RTL8309M-CG is a 9-port 10/100M Ethernet switch controller that integrates memory, nine MACs, and eight physical layer transceivers for 10Base-T and 100Base-TX operation into a single chip. It supports a (T)MII/RMII interface for external devices to connect to the 9th MAC. The external device co • 9-port switch controller with memory and transceiver for 10Base-T and 100Base-TX\n• Non-blocking wire-speed\n• Compatible with IEEE 802.3/802.3u\n• Built-in high efficiency SRAM for packet buffer, with 2K-entry lookup table\n• 2048 byte maximum packet length\n• Flow control fully supported\n• Half;

以太网芯片

SINGLE-CHIP 9-PORT 10/100MBPS SWITCH CONTROLLER

文件：866.55 Kbytes Page：115 Pages

5 MHz.500 MHz 100 dB Demodulating Logarithmic Amplifier with Limiter Output

PRODUCT DESCRIPTION The AD8309 is a complete IF limiting amplifier, providing both an accurate logarithmic (decibel) measure of the input signal (the RSSI function) over a dynamic range of 100 dB, and a programmable limiter output, useful from 5 MHz to 500 MHz. It is easy to use, requiring few e

5 MHz.500 MHz 100 dB Demodulating Logarithmic Amplifier with Limiter Output

PRODUCT DESCRIPTION The AD8309 is a complete IF limiting amplifier, providing both an accurate logarithmic (decibel) measure of the input signal (the RSSI function) over a dynamic range of 100 dB, and a programmable limiter output, useful from 5 MHz to 500 MHz. It is easy to use, requiring few e

5 MHz.500 MHz 100 dB Demodulating Logarithmic Amplifier with Limiter Output

PRODUCT DESCRIPTION The AD8309 is a complete IF limiting amplifier, providing both an accurate logarithmic (decibel) measure of the input signal (the RSSI function) over a dynamic range of 100 dB, and a programmable limiter output, useful from 5 MHz to 500 MHz. It is easy to use, requiring few e

INTRODUCTION

INTRODUCTION