LVDS Compatibility

Abstract Low Voltage Differential Signaling (LVDS) technology offers one of the best serial data transmission profiles available today for physical layer interfaces. With many existing interface standards to choose from, this applications note provides guidelines on the inter-operation of LVDS

Vernetzung von bis zu 32 Einheiten per RS485-Bus

[U.S. Converters] Industrial Isolated Converter UT503 is an industrial strength optically isolated RSR232 to RS422 / RS485 converter powered by an external power supply. With its standard DIN rail mount and optional screw terminals it is a great choice for industrial and commercial applications

Fanless Multi-Range D.C. Power Supply

FEATURES * Constant Power Output for 5 Times Multi-range(V&1) Operation © Natural Convection Cooling Design(Fanless Structure) © Preset Memory Function © Output ON/OFF Delay Function « CV, CC Priority Mode « Adjustable Slew Rate For Voltage and Current « Bleeder Circuit Control

TMCM-1240 Hardware Manual

Features • Single axis controller/driver for 2-phase bipolar stepper motor • Linear and sixPoint™ ramps • +10. . .30V DC supply voltage • Up to 2A RMS motor current • RS485, CAN & USB interface • integrated sensOstep encoder and support for external encoder • S/D interface • multi-purpos

ES-346 ETHERNET TO SERIAL DEVICE SERVER Ethernet 4 Port RS422/485

Features l 4 port RS422/485 l Max baud rate 1,000,000 1 MegaBaud l 10/100Base TX Ethernet port l User friendly interface, simple to use, powerful in operation l Web configuration and RFC2217 compliant interface l IP-30 rated enclosure l LED status indication l Optional DIN rail mounting ki

Single Port USB to RS422 / 485 adapter

TAA Compliant. • 512 byte receive buffer. • 512 byte transmit buffer for high speed data throughput. • Requires no IRQ, DMA, I/O port. • Data rates: 300 bps to 921.6K bps. • Auto transmit buffer control for 2-wire RS-485 half-duplex operation. • Termination resistors and BIAS resistors insta

USB 2.0 Industrial Adapter User Selectable RS232/422/485 FTDI Chip

1 x RS422/485 DB9 male port • RS-232 Speed up to 500kbps • No external power supply

MODEL CUB짰5 - MINIATURE ELECTRONIC 8-DIGIT DUAL COUNTER AND RATE INDICATOR

文件：1.31576 Mbytes Page：16 Pages

BC8050 | RS485 Bus Terminal Controller

文件：134.35 Kbytes Page：3 Pages

MFC Accessories

文件：1.05833 Mbytes Page：4 Pages

Industrial Surge Protected Converter

文件：47.56 Kbytes Page：1 Pages

Industrial Isolated Converter

文件：137.71 Kbytes Page：1 Pages

Features Receiver Three-State Outputs Low Supply Current: 1mA Typical

文件：337.95 Kbytes Page：20 Pages

Transceivers

文件：337.95 Kbytes Page：20 Pages

丝印代码：RS485E；ESD-Protected, High Speed, True Fail-Safe VOD2 Enhanced, RS485 Transceiver IC

Features  Integrated Transient Voltage Suppressor (TVS) in the Transceiver IC  TVS Protection for Bus Terminals : ±15 kV IEC 61000-4-2, Contact Discharge ±18 kV IEC 61000-4-2, Air-Gap Discharge ±15 kV EIA/JEDEC Human Body Model  HBM ±8kV ESD Protection for all pins  MM ±800V ESD Protec

丝印代码：RS485NEESA；Polarity Free, 5.0V Operation, High Speed, High ESD-Protected RS485 Transceiver IC

Features  Polarity Free for RS485 bus pins  Integrated TVS Protection for Bus Terminals : ±15 kV IEC 61000-4-2, Contact Discharge ±20 kV IEC 61000-4-2, Air-Gap Discharge  HBM ±8kV ESD Protection for all pins  MM ±800V ESD Protection for all pins  Meet the Requirements of the EIA/TIA-48

丝印代码：RS485NEESA；Bus-Polarity Correcting RS-485 Transceiver for E-Meters

1FEATURES • Exceeds Requirements of EIA-485 Standard • Bus-Polarity Correction within 76 ms • Data Rate: 300 bps to 250 kbps • Works with Two Configurations: – Failsafe Resistors Only – Failsafe and Termination Resistors • Up to 256 Nodes on a Bus • SOIC-8 Package for Backward Compatibilit

丝印代码：RS485NEESA；Bus-Polarity Correcting RS-485 Transceiver for E-Meters

1FEATURES • Exceeds Requirements of EIA-485 Standard • Bus-Polarity Correction within 76 ms • Data Rate: 300 bps to 250 kbps • Works with Two Configurations: – Failsafe Resistors Only – Failsafe and Termination Resistors • Up to 256 Nodes on a Bus • SOIC-8 Package for Backward Compatibilit

丝印代码：RS485NEESA；Bus-Polarity Correcting RS-485 Transceiver for E-Meters

1FEATURES • Exceeds Requirements of EIA-485 Standard • Bus-Polarity Correction within 76 ms • Data Rate: 300 bps to 250 kbps • Works with Two Configurations: – Failsafe Resistors Only – Failsafe and Termination Resistors • Up to 256 Nodes on a Bus • SOIC-8 Package for Backward Compatibilit

丝印代码：RS485NEESA；Bus-Polarity Correcting RS-485 Transceiver for E-Meters

1FEATURES • Exceeds Requirements of EIA-485 Standard • Bus-Polarity Correction within 76 ms • Data Rate: 300 bps to 250 kbps • Works with Two Configurations: – Failsafe Resistors Only – Failsafe and Termination Resistors • Up to 256 Nodes on a Bus • SOIC-8 Package for Backward Compatibilit

丝印代码：RS485NEESA；Bus-Polarity Correcting RS-485 Transceiver for E-Meters

1FEATURES • Exceeds Requirements of EIA-485 Standard • Bus-Polarity Correction within 76 ms • Data Rate: 300 bps to 250 kbps • Works with Two Configurations: – Failsafe Resistors Only – Failsafe and Termination Resistors • Up to 256 Nodes on a Bus • SOIC-8 Package for Backward Compatibilit

丝印代码：RS485NEESA；Bus-Polarity Correcting RS-485 Transceiver for E-Meters

1FEATURES • Exceeds Requirements of EIA-485 Standard • Bus-Polarity Correction within 76 ms • Data Rate: 300 bps to 250 kbps • Works with Two Configurations: – Failsafe Resistors Only – Failsafe and Termination Resistors • Up to 256 Nodes on a Bus • SOIC-8 Package for Backward Compatibilit

Isolated transceiver module

Product Features : 1. Driving voltage: 3.3V/5.0V 1. Isolation voltage: 3000VDC 1. Transmission rate: 19200bps(MAX) One bus overvoltage protection A quiescent current

Isolated transceiver module

Product Features : 1. Driving voltage: 3.3V/5.0V 1. Isolation voltage: 3000VDC 1. Transmission rate: 19200bps(MAX) One bus overvoltage protection A quiescent current

Isolated two-way communication

Product Features : 1. Driving voltage: 3.3V/5.0V 1. Isolation voltage: 3000VDC 1. Transmission rate: 500Kbps(MAX) A quiescent current

Isolated two-way communication

Product Features : 1. Driving voltage: 3.3V/5.0V 1. Isolation voltage: 3000VDC 1. Transmission rate: 500Kbps(MAX) A quiescent current

485隔 离 型 收 发 模 块

Product Features : - Driving voltage: 3.3V/5.0V 1. Isolation voltage: 3000 VDC A transmission rate: 9600bps (MAXJ One bus overvoltage protection A quiescent current

AC-DC模块电源

AC-DC模块电源

中大功率（40-200W）AC-DC模块电源

功能：传感器 包装：盒 描述：LORAWAN RS485/UART CONVERTER RF/IF，射频/中频和 RFID 射频接收器、发射器、收发器成品

包装：散装 描述：MODULE CONVERTER RS232 TO RS485 开发板，套件，编程器 配件

Low Power RS-485/RS-422 Multipoint Transceiver

文件：140.24 Kbytes Page：10 Pages

Low Power RS-485/RS-422 Multipoint Transceiver

文件：140.24 Kbytes Page：10 Pages

Low Power RS-485/RS-422 Multipoint Transceiver

文件：140.24 Kbytes Page：10 Pages

Low Power RS-485/RS-422 Multipoint Transceiver

文件：140.24 Kbytes Page：10 Pages

Low Power RS-485/RS-422 Multipoint Transceiver

文件：140.24 Kbytes Page：10 Pages