418.0 MHz SAW Filter

The RF1171D is a low-loss, compact, and economical surface-acoustic-wave (SAW) filter designed to provide front-end selectivity in 418.0 MHz receivers. Receiver designs using this filter include superhet with 10.7 MHz or 500 kHz IF, direct conversion and superregen. Typical applications of these r

Adafruit Small-Size Perma-Proto Raspberry Pi Breadboard PCB Kit

o 13 rows of 4-pin holes breaking out the GPIO cable, 4 rows of double 4-pin hole rows o 4 power rails with positive/negative markings o 1.8 x 2.0 (46mm x 55mm), 0.063 thick FR4 o 1.2mm / 0.047 drill holes

Micropower Ultrasensitive Hall Effect Switch

Description The A1171 integrated circuit is an ultrasensitive, Hall effect switch with latched digital outputs and either unipolar or omnipolar magnetic actuation. It features operation at low supply currents and voltages, making it ideal for battery operated electronics. The low operating supply

Micropower Ultrasensitive Hall Effect Switch

Description The A1171 integrated circuit is an ultrasensitive, Hall effect switch with latched digital outputs and either unipolar or omnipolar magnetic actuation. It features operation at low supply currents and voltages, making it ideal for battery operated electronics. The low operating supply

General-Purpose Hall Effect Latch

文件：1.11004 Mbytes Page：2 Pages

600mA Voltage-Scaling Step-Down Converter for RF Power Amplifiers with Bypass Switch

文件：795.07 Kbytes Page：22 Pages