600 - 3500 MHz Broadband Low Power SP3T Switch

Qorvo's RF1136 is a single-pole three-throw (SP3T) switch designed for general purpose switching applications which require very low insertion loss and low power handling capability. The RF1136 is ideally suited for battery operated applications requiring high performance switching with very low DC ·Low Frequency - 3.5 GHz Operations\n·Very Low Insertion Loss: Cell Band 0.25 dB, PCS Band 0.30 dB\n·High Isolation: Cell Band 28 dB, PCS Band 22 dB\n·Compatible with Low Voltage Logic: (VHIGH = 1.8 V)\n·Excellent Linearity Performance(IIP2): Cell Band 110 dBm, PCS Band 110 dBm\n·Lowest BOM Cost and;

BROADBAND LOW POWER SP3T SWITCH

文件：593.58 Kbytes Page：9 Pages

AM Tuners for Car Radios and Home Stereos

Overview The LA1136N/NM and LA1137N/NM are high-performance AM electronic tuner ICs offering sophisticated functions. They are especially suited for use in car radio and home stereo (antenna: loop) applications. Features .Excellent cross modulation characteristic: Meets the requireme

AM Tuners for Car Radios and Home Stereos

Overview The LA1136N/NM and LA1137N/NM are high-performance AM electronic tuner ICs offering sophisticated functions. They are especially suited for use in car radio and home stereo (antenna: loop) applications. Features .Excellent cross modulation characteristic: Meets the requireme

AM Tuners for Car Radios and Home Stereos

Overview The LA1136N/NM and LA1137N/NM are high-performance AM electronic tuner ICs offering sophisticated functions. They are especially suited for use in car radio and home stereo (antenna: loop) applications. Features .Excellent cross modulation characteristic: Meets the requireme

UHF POWER TRANSISTOR

DESCRIPTION SSM device type SD1136 is a 12.5 volt epitaxial silicon NPN planar transistor designed primarily for UHF communications. FEATURES ● Designed for UHF military and commercial equipment ● 10.0 watts (min.) with greater than 6.0 dB gain ● Withstands infinite VSWR under operating condi

Photo Modules for PCM Remote Control Systems

Description The TSOP11.. – series are miniaturized receivers for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor. The main benefit is the