1.57mm (.062) Diameter PC Board Pin Terminal, Male, Tin Plated Brass Contact

文件：212.52 Kbytes Page：2 Pages

Laser Driver Oscillator

General Description The EL6203C is a push-pull oscillator used to reduce laser noise. It uses the standard interface to existing ROM controllers. The frequency and amplitude are each set with a separate resistor connected to ground. The tiny package and harmonic reduction allow the part to be pla

DC/DC Converter Applications

PNP / NPN Epitaxial Planar Silicon Transistors Features • Adoption of MBIT processes. • High current capacitance. • Low collector-to-emitter saturation voltage. • High-speed switching. • Ultrasmall package facilitates miniaturization in end products (mounting height : 0.85mm). • High allowa

8-BIT MCUs WITH A/D CONVERTER, TWO TIMERS, OSCILLATOR SAFEGUARD & SAFE RESET

INTRODUCTION The ST6200C, 01C and 03C devices are low cost members of the ST62xx 8-bit HCMOS family of microcontrollers, which is targeted at low to medium complexity applications. All ST62xx devices are based on a building block approach: a common core is surrounded by a number of on-chip periph

LOW VOLTAGE 8-BIT ROM MCUs WITH A/D CONVERTER,AND 16 PINS

INTRODUCTION The ST6200C, 01C and 03C devices are low cost members of the ST62xx 8-bit HCMOS family of microcontrollers, which is targeted at low to medium complexity applications. All ST62xx devices are based on a building block approach: a common core is surrounded by a number of on-chip periph

GaAlAs Infrared Emitting Diodes in ø 5 mm (T–13/4) Package

文件：87.93 Kbytes Page：6 Pages