Features

Multi-Mode Power ManagerTM (MMPM)

▪ Optional multi-mode switching supply controller configurable for DC/DC Buck or SEPIC topologies

▪ Direct DC supply up to 20V

▪ Integrated LDOs for MCU core, IO, analog with power and hibernate management

▪ Power and temperature monitor, warning and fault detection

▪ Low-power total hibernate mode, IQ = 18μA

Configurable Analog Front-EndTM (CAFE)

▪ 3 Differential Programmable-gain Amplifiers

▪ 4 Single-ended Programmable-gain Amplifiers

▪ 2.5V ADC reference

▪ Programmable over-current shutdown

▪ Hibernate push-button wake-up

▪ Power supply monitoring via ADC

Application Specific Power DriversTM (ASPD)

▪ Integrated level shifters and pre-drivers

▪ 3 Low-side and 3 High-Side gate drivers with 1.5A gate driving capacity

▪ Break-before-make (BBM) hardware dead-time enforcement to prevent shoot-through

▪ Configurable propagation delay and fault protection

▪ OC, UV protection

MCU

▪ 150MHz Arm® Cortex®-M4F MCU

▪ Hardware multiplier and divider

▪ Single-precision Floating Point Unit (FPU)

▪ Nested Vectored Interrupt Controller (NVIC) with 32 interrupts and 8 priority levels

▪ Clock-gating for low-power operation

▪ Embedded Trace Macrocell (ETM) for in-system debugging in real-time without breakpoints

Memory

▪ 128kB FLASH, 32kB SRAM with ECC

▪ 2 x 1kB INFO FLASH for manufacturing information

▪ 1 x 1kB INFO FLASH for user parameter storage and application configuration code

▪ 4-level user-configurable code protection

ADC

▪ 12-bit 2.5MSPS SAR ADC

▪ Dynamic Triggering and Sequence Engine (DTSE)

o Up to 16 configurable sequences

o Dedicated memory for conversion results

IO

▪ 3.3V digital input/output or analog input for ADC

▪ Configurable weak pull-up or pull-down

▪ Configurable drive strength (6mA to 25mA minimum)

▪ Flexible peripheral MUX allowing each IO pin to select from up to 8 peripheral functions

▪ Flexible interrupt controller

Flexible Clock Control System (CCS)

▪ 300MHz PLL from internal 2 oscillator

▪ 20MHz ring oscillator

▪ Optional 20MHz external clock input

Timing Generators

▪ Four 16-bit PWM timers with up to 8 CCR output units each

▪ 24-bit SysTick count-down timer

▪ Windowed Watch-dog Timer (WWDT)

▪ 24-bit Real-Time Clock (RTC) with calendar and alarm

▪ 2 x 24-bit General-purpose count-down timers with interrupt

▪ Hibernate wake-up timer for sleep modes from 0.125s to 8s

Communication Peripherals

▪ 3 x USART (UART or SPI)

▪ I2C master/slave

▪ SPI master/slave, up to 25MHz

▪ CAN 2.0B Controller

▪ SWD or JTAG serial debug interfaces

▪ Embedded Trace Macrocell (ETM)

8b/16b CRC Engine

96-bit Unique ID

Physical

▪ TA = -40C to 125C

▪ QFN 8x8mm 64-pin package

o Exposed pad for thermal management