698 - 3800 MHz SPDT Switch for Diversity Applications

The QM12002 is a low insertion loss, high isolation single-pole dual-throw (SPDT) switch with performance optimized for low power routing and diversity applications. The QM12002 is controlled by 1 bit GPIO with a compact 0.7 mm x 1.1 mm x 0.59 mm size, which allows for a small solution size with no • Low Insertion Loss\n• High Isolation\n• One Bit Controller Only\n• Broadband Performance Suitable for All Cellular Modulation Schemes up to 3.8 GHz\n• Compact Size\n• HBM Rating > 2 kV on All Ports\n• No DC Blocking Capacitors Required in Typical Applications;

PROTECTOR OF SPEAKERS AND POWER AMPLIFIERS

Protector of Speakers and Power Amplifier The Hitachi monolithic IC HA 12002 is designed for protecting power amplifiers and speakers in various amplifiers and receivers. The HA 12002 is encapsulated in 8-pin single-in-line package.

HITAG co-processor

GENERAL DESCRIPTION The HITAG(1) co-processor is designed to perform all computations of the read/write device in a system where HITAG1 and HITAG2 transponders are used. The device performs all encryption computations needed to access transponders and cards based on the HITAG1 respectively HITAG

10/100 BASE T SINGLE PORT SURFACE MOUNT MAGNETICS

Features: 1. Meets IEEE 802.3 and ANSI X.3.263 standards including 350uH OCL with 8mA bias. 2. Designed for reflow soldering at temperature 230±5°C. 3. Compact footprint for use in the most space restrictive applications. 4. Turns Ratio tolerance: ±5 5. Operating temperature: -40°C to +85°C

SINGLE CORLORED, BI-COLORED LED

文件：186.59 Kbytes Page：2 Pages

High Reliability

文件：54.05 Kbytes Page：2 Pages