Alternistor Triacs (6 A to 40 A)

General Description Teccor offers bidirectional alternistors with current ratings from 6 A to 40 A and voltages from 200 V to 1000 V as part of Teccors broad line of thyristors. Teccors alternistor is specifically designed for applications that switch highly inductive loads. A special chip offers

Alternistor Triacs (6 A to 40 A)

General Description Teccor offers bidirectional alternistors with current ratings from 6 A to 40 A and voltages from 200 V to 1000 V as part of Teccors broad line of thyristors. Teccors alternistor is specifically designed for applications that switch highly inductive loads. A special chip offers

Three quadrant triacs

Description Passivated high commutation triacs in a plastic envelope intended for use in circuits where high static and dynamic dV/dt and high dI/dt can occur. These devices will commutate the full rated ms current at the maximum rated junction temperature without the aid of a snubber. Appli

isc Triacs

FEATURES · 16A RMS Snubberless Triac · 800V Symmetrical blocking voltage · Good Commutation Performance APPLICATIONS · Motor Speed Controller · Heater Control · Mixer

Alternistor Triacs (6 A to 40 A)

General Description Teccor offers bidirectional alternistors with current ratings from 6 A to 40 A and voltages from 200 V to 1000 V as part of Teccors broad line of thyristors. Teccors alternistor is specifically designed for applications that switch highly inductive loads. A special chip offers

Alternistor Triacs (6 A to 40 A)

General Description Teccor offers bidirectional alternistors with current ratings from 6 A to 40 A and voltages from 200 V to 1000 V as part of Teccors broad line of thyristors. Teccors alternistor is specifically designed for applications that switch highly inductive loads. A special chip offers

Alternistor Triacs (6 A to 40 A)

General Description Teccor offers bidirectional alternistors with current ratings from 6 A to 40 A and voltages from 200 V to 1000 V as part of Teccors broad line of thyristors. Teccors alternistor is specifically designed for applications that switch highly inductive loads. A special chip offers

Alternistor Triacs (6 A to 40 A)

General Description Teccor offers bidirectional alternistors with current ratings from 6 A to 40 A and voltages from 200 V to 1000 V as part of Teccors broad line of thyristors. Teccors alternistor is specifically designed for applications that switch highly inductive loads. A special chip offers

Alternistor Triacs (6 A to 40 A)

General Description Teccor offers bidirectional alternistors with current ratings from 6 A to 40 A and voltages from 200 V to 1000 V as part of Teccors broad line of thyristors. Teccors alternistor is specifically designed for applications that switch highly inductive loads. A special chip offers

Alternistor Triacs (6 A to 40 A)

General Description Teccor offers bidirectional alternistors with current ratings from 6 A to 40 A and voltages from 200 V to 1000 V as part of Teccors broad line of thyristors. Teccors alternistor is specifically designed for applications that switch highly inductive loads. A special chip offers

Alternistor Triacs (6 A to 40 A)

General Description Teccor offers bidirectional alternistors with current ratings from 6 A to 40 A and voltages from 200 V to 1000 V as part of Teccors broad line of thyristors. Teccors alternistor is specifically designed for applications that switch highly inductive loads. A special chip offers

包装：散装 描述：TRIAC 800V 16A TO220

包装：散装 描述：TRIAC 800V 16A TO220

Alternistor Triacs

文件：188.67 Kbytes Page：10 Pages

三端双向可控硅

三端双向可控硅

Alternistor Triacs

文件：188.67 Kbytes Page：10 Pages

三端双向可控硅

Alternistor Triacs

文件：188.67 Kbytes Page：10 Pages

Alternistor Triacs

文件：188.67 Kbytes Page：10 Pages

Alternistor Triacs

文件：188.67 Kbytes Page：10 Pages

Alternistor Triacs

文件：188.67 Kbytes Page：10 Pages

Single-channel 1.8-volt step-up DC-DC converter control IC

■ Overview The AN8016NSH is a single-channel PWM DC-DC converter control IC that supports low-voltage operation. This IC allows a stepped-up voltage output to be provided with a minimal number of external components. It features a low minimum operating voltage of 1.8 V, and due to being provided

Single-channel 1.8-volt step-up DC-DC converter control IC

■ Overview The AN8016NSH is a single-channel PWM DC-DC converter control IC that supports low-voltage operation. This IC allows a stepped-up voltage output to be provided with a minimal number of external components. It features a low minimum operating voltage of 1.8 V, and due to being provided

Fast high-voltage soft-recovery controlled avalanche rectifiers

DESCRIPTION Rugged glass package, using a high temperature alloyed construction. This package is hermetically sealed and fatigue free as coefficients of expansion of all used parts are matched. The package is designed to be used in an insulating medium such as resin, oil or SF6 gas. FEATURES

2.5GHz low voltage fractional-N synthesizer

GENERAL DESCRIPTION The SA8016 BICMOS device integrates programmable dividers, charge pumps and a phase comparator to implement a phase-locked loop. The device is designed to operate from 3 NiCd cells, in pocket phones, with low current and nominal 3 V supplies. FEATURES • Low phase noise • Lo

2.5GHz low voltage fractional-N synthesizer

GENERAL DESCRIPTION The SA8016 BICMOS device integrates programmable dividers, charge pumps and a phase comparator to implement a phase-locked loop. The device is designed to operate from 3 NiCd cells, in pocket phones, with low current and nominal 3 V supplies. FEATURES • Low phase noise • Lo