Axioline F, power measurement module, input voltage: up to 400 V AC (phase/neutral) or

690 V AC (phase/phase), input current: up to 5 A AC, transmission speed in local bus:

100 Mbps, degree of protection: IP20 , including bus base module and Axioline F connectors

Product Description

The module is designed for use within an Axioline F station. The power measurement module is used for direct measurement of AC currents up to

5 A, including neutral conductor current and phase conductor voltages up to 400 V AC (phase to neutral conductor) or outer conductor voltages up

to 690 V AC (phase to phase). The module is used to perform analysis of AC networks. You can use it in distribution systems for measuring current,

voltage, and power, as well as detecting distortion and harmonics. You can use the power measurement module in two operating modes. In “R.m.s.

Values” mode, the module acquires mains variables in three-phase mains. Mains variables are phase currents, neutral conductor current, phase

and outer conductor voltages, real power, reactive power, and apparent power as well as the power factors of phases, energy flow directions, and

frequency. In Instantaneous Values mode, the module acquires the instantaneous (scanning) values of a measuring signal. This measuring mode

is used to analyze the waveform of the measuring signal.

Your advantages

• 4 inputs, 0 A AC ... 5 A AC for phase currents and neutral conductor current

• 3 inputs for outer conductor voltages up to 690 V AC, supports direct connection

• Harmonics analysis

• Determination of maximum values

• Energy meter

• Process data update