Ethernet switch, 5 Ethernet ports on the front in M12 format, automatic detection of 10 or 100

Mbps data transmission rate, coupling of network segments with different transmission speeds,

auto crossing function, IP67 protection

Product Description

Ethernet interface: The FL SWITCH 1605 M12 has five Ethernet ports on the front in M12 format, to which only CAT5/CAT6 Ethernet cables with Dcoded

M12 connectors can be connected. The data transmission speed is 10 Mbps or 100 Mbps. In addition, each port has an autocrossing

function at 100 Mbps. It is not necessary to distinguish between 1:1 and crossover Ethernet cables. Switching properties of the FL SWITCH 1605

M12 – Store and forward: The switch independently learns the addresses for terminal devices, which are connected via a port, by evaluating the

source addresses in the data telegrams. Only packets with unknown addresses, with a source address of this port or with a multicast/broadcast

address in the destination address field are forwarded via the corresponding port. The switch can store up to 4096 addresses in its address table

with an aging time of 40 seconds. This is important if more than one terminal device is connected to one or more ports. In this way, several

independent subnets can be connected to one switch. - Multi-address function: The switch independently learns the addresses for terminal devices,

which are connected via a port, by evaluating the source addresses in the data telegrams. Only packets with unknown addresses, with a source

address of this port or with a multicast/broadcast address in the destination address field are forwarded via the corresponding port. The switch can

store up to 4096 addresses in its address table with an aging time of 40 seconds. This is important if more than one terminal device is connected to

one or more ports. In this way, several independent subnets can be connected to one switch. - Quality of Service (QoS) With the aid of the Quality

of Service function, the switch can process PROFINET traffic preferentially. To do this, the switch detects the QoS priority from the Ethernet packets

and forwards the Ethernet packets with higher priority first.

Your advantages

• Robust IP67 housing

• Easy panel mounting