Axioline E, Digital I/O device, IO-Link ports Class A: 1, connection method: M12 connector (Acoded),

connection technology: 3-conductor, Digital inputs: 8, 24 V DC, connection technology:

4-conductor, Digital outputs: 8, 24 V DC, 2 A, connection technology: 3-conductor, IO-Link, with

safe signal path, degree of protection: IP65/IP67

Product Description

You can connect this Axioline E device to an IO-Link master via an IO-Link A port. You can use this device to acquire and output digital signals via

IO-Link. Use within different networks is possible via the IO-Link master. When using a safety relay module to shut down the supply voltage for the

output groups, you can shut down the outputs in a safety-related way. The outputs are then switched to the power off state independently of the

control signal.

Your advantages

• Connection to an IO-Link master with M12 connector (A-coded, 4-pos.)

• Type A port

• IO-Link specification V1.1.3

• Connection of up to 8 inputs with M12 connectors (A-coded, 5-pos.)

• Connection up to 8 outputs with M12 connectors (A-coded, 5-pos.)

• Passive safe outputs up to SIL 3 in accordance with IEC 61508, up to Cat. 4/PL e in accordance with EN ISO 13894-1

• Connection of actuator supply UA1 and UA2 with M12 connector (L-coded, 4-pos.)

• Diagnostic and status indicators

• Single-channel diagnostics

• Short-circuit and overload protection of the sensor supply

• Device rating plate stored

• IP65/IP67 degree of protection