DESCRIPTION

The 74ALVC162835A is an 18-bit universal bus driver. Data flow is controlled by output enable (OE), latch enable (LE) and clock inputs (CP). When LE is HIGH, the A to Y data flow is transparent. When LE is LOW and CP is held at LOW or HIGH, the data is latched; on the LOW to HIGH transient of CP the A-data is stored in the latch/flip-flop. The 74ALVC162835A is designed with 30Ω_series resistors in both HIGH or LOW output stages.

FEATURES

• Wide supply voltage range of 1.2 V to 3.6 V

• Complies with JEDEC standard no. 8-1A.

• CMOS low power consumption

• Direct interface with TTL levels

• Current drive ± 12 mA at 3.0 V

• MULTIBYTETM flow-through standard pin-out architecture

• Low inductance multiple VCC and GND pins for minimum noise and ground bounce

• Output drive capability 50 Ω transmission lines @ 85°C

• Integrated 30Ω termination resistors

• Diode clamps to VCC and GND on all inputs

• Input diodes to accommodate strong drivers