Solid State Battery GuardS

A Wide Range of Features There are six units in the range from 10A to 200A. The 10A and 20A unit offer a simple inline system, usually wired to a specific piece of equipment. These units do not require chassis mounting and simply connect and tie wrap neatly within the wiring system. The 4

pulse transformers

文件：100.87 Kbytes Page：2 Pages

PowerTector Series Low Voltage Disconnect

文件：172.25 Kbytes Page：2 Pages

包装：散装 描述：PLIZER STRAIGHT SMOOTH 工具 镊子

碳膜电位器

Cable Sensor, Pt100/Pt1000

Description A platinum resistor is built into the temperature sensor. Changes in temperature are refl ected by changes in the electrical resistance, so that measuring the value of the resistance gives an analogue expression for the actual temperature. The Pt100 element has a resistance of 100

Solid State Battery GuardS

A Wide Range of Features There are six units in the range from 10A to 200A. The 10A and 20A unit offer a simple inline system, usually wired to a specific piece of equipment. These units do not require chassis mounting and simply connect and tie wrap neatly within the wiring system. The 4

Cable Sensor, Pt100/Pt1000

Description A platinum resistor is built into the temperature sensor. Changes in temperature are refl ected by changes in the electrical resistance, so that measuring the value of the resistance gives an analogue expression for the actual temperature. The Pt100 element has a resistance of 100

Pt1000 sensor module with standard signal output

Characteristic features • Miniature sensor module for Pt1000 • Two versions with standard signal 0...10 V or 4...20 mA are available • Versions with different measuring ranges of -30...+300 °C • Resistance characteristics as per DIN EN 60751 • Precisely 3 point calibrated, no further adjustme

1000 Ohm Flat Film Detectors

General Description Class B, A and 1/3DIN available in accordance with IEC60751 Features #1 Thin film construction Features #2 Resists vibration & shock

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…10000 psi rel. ■7…33 VDC ■Analog output 4…20 mA ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with a fully welded metal

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…10000 psi rel. ■10…30 VDC ■Analog output 4…20 mA ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 ■ATEX, IECEx ■Category II 1/2 GD, Ex zone 0 Functional principle The pressure sensors in the PT…‐2000 pro

Pressure Transmitter – With Voltage Output (3-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…10000 psi rel. ■8…33 VDC ■Analog output 1…6 V ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with a fully welded metal me

Pressure Transmitter – With Current Output (2-Wire)

Features ■Compact and robust design ■Pressure connection with integrated peak pressure aperture ■Minimum influence of temperature on accuracy within the entire temperature range of -40…+125°C ■Excellent EMC properties ■Pressure range 0…1000 psi rel. Functional principle The pressure tran

Pressure Transmitter – With Voltage Output (3-Wire)

Features ■Compact and robust design ■Pressure connection with integrated peak pressure aperture ■Minimum influence of temperature on accuracy within the entire temperature range of -40…+125°C ■Excellent EMC properties ■Pressure range 0…1000 psi rel. Functional principle The pressure tran

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…1000 psi rel. ■7…33 VDC ■Analog output 4…20 mA ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with a fully welded metal m

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…1000 psi rel. ■7…33 VDC ■Analog output 4…20 mA ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with a fully welded metal m

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…1000 psi rel. ■10…30 VDC ■Analog output 4…20 mA ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 ■ATEX, IECEx ■Category II 1/2 GD, Ex zone 0 Functional principle The pressure sensors in the PT…‐2000 prod

Pressure Transmitter – With Voltage Output (3-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…1000 psi rel. ■12…33 VDC ■Analog output 0…10 V ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with a fully welded metal m

Pressure Transmitter – With Current Output (2-Wire)

Features ■For mobile hydraulic applications ■Fully welded metal measuring cell ■Sealless ■With pressure tip orifice ■Compact and robust design ■Excellent EMC properties ■Excellent accuracy and long-term stability ■Kfz-Norm ISO 16750 ■Pressure range 0…1000 psi rel. ■7.5…33 VDC ■Analog ou

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…1000 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4 female thread, front sealing ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…1000 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…1000 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M12 × 1 Functional pr

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…1000 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection R 1/4 male thread EN 10226 ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate

The LTP1245 is a thermal line printer that offers high-speed, high-resolution printing in a compact, lightweight mechanism ideal for today’s 5V portable applications.

• High resolution printing (8 dots/mm) • High speed, low voltage printing (25mm @ 5V, 62.5mm @ 8.0V) • Low 4.2V to 8.5V power supply operation • Prints on label stock • Available with or without paper feed knob • Available with straight or curved paper path (up to 95 μm) • Thick paper prin

Pressure Transmitter – With Current Output (2-Wire)

Features ■Compact and robust design ■Pressure connection with integrated peak pressure aperture ■Minimum influence of temperature on accuracy within the entire temperature range of -40…+125°C ■Excellent EMC properties ■Pressure range 0…100 psi rel Functional principle The pressure transm

Pressure Transmitter – With Voltage Output (3-Wire)

Features ■Compact and robust design ■Pressure connection with integrated peak pressure aperture ■Minimum influence of temperature on accuracy within the entire temperature range of -40…+125°C ■Excellent EMC properties ■Pressure range 0…100 psi rel. Functional principle The pressure trans

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…100 psi rel. ■7…33 VDC ■Analog output 4…20 mA ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with a fully welded metal me

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…100 psi rel. ■7…33 VDC ■Analog output 4…20 mA ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with a fully welded metal me

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…100 psi rel. ■7…33 VDC ■Analog output 4…20 mA ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with a fully welded metal me

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…100 psi rel. ■10…30 VDC ■Analog output 4…20 mA ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 ■ATEX, IECEx ■Category II 1/2 GD, Ex zone 0 Functional principle The pressure sensors in the PT…‐2000 produ

Pressure Transmitter – With Voltage Output (3-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…100 psi rel. ■12…33 VDC ■Analog output 0…10 V ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with a fully welded metal me

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…100 psi rel. ■Pressure peak orifice ■7…33 VDC ■Analog output 4…20 mA ■Process connection 7/16 UNF (SAE) male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate w

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…100 psi rel. ■Pressure peak orifice ■7…33 VDC ■Analog output 4…20 mA ■Process connection 7/16 UNF (SAE) male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate w

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…100 psi rel. ■Pressure peak orifice ■7…33 VDC ■Analog output 4…20 mA ■Process connection R 1/4 male thread EN 10226 ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…100 psi rel. ■Pressure peak orifice ■7…33 VDC ■Analog output 4…20 mA ■Process connection R 1/4 male thread EN 10226 ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…100 psi rel. ■Pressure peak orifice ■7…33 VDC ■Analog output 4…20 mA ■Process connection 1/2-14 NPT female thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate wit

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…100 psi rel. ■Pressure peak orifice ■7…33 VDC ■Analog output 4…20 mA ■Process connection 1/2-14 NPT female thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate wit

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…100 psi rel. ■Pressure peak orifice ■7…33 VDC ■Analog output 4…20 mA ■Process connection 9/16-18 UNF (SAE) male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operat

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…100 psi rel. ■Pressure peak orifice ■7…33 VDC ■Analog output 4…20 mA ■Process connection 9/16-18 UNF (SAE) male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operat

Pressure Transmitter – With Current Output (2-Wire)

Features ■Compact and robust design ■Pressure connection with integrated peak pressure aperture ■Accuracy hardly affected by temperature within entire range ‐40…+125°C ■Excellent EMC properties ■Patented medium stop system, leakage protection in case of a burst ■Pressure range 0…100 bar

Pressure Transmitter – With Voltage Output (3-Wire)

Features ■Compact and robust design ■Pressure connection with integrated peak pressure aperture ■Accuracy hardly affected by temperature within entire range ‐40…+125°C ■Excellent EMC properties ■Pressure range 0…100 bar rel. Functional principle The pressure transmitters of the PT…-1 ser

Pressure Transmitter – With Current Output (2-Wire)

Features ■Compact and robust design ■Pressure connection with integrated peak pressure aperture ■Accuracy hardly affected by temperature within entire range ‐40…+125°C ■Excellent EMC properties ■Pressure range 0…100 bar rel. Functional principle The pressure transmitters of the PT…-1 ser

Pressure Transmitter – With Voltage Output (3-Wire)

Features ■Compact and robust design ■Pressure connection with integrated peak pressure aperture ■Accuracy hardly affected by temperature within entire range ‐40…+125°C ■Excellent EMC properties ■Pressure range 0…100 bar rel. Functional principle The pressure transmitters of the PT…-1 ser

Pressure Transmitter – With Current Output (2-Wire)

Features ■Compact and robust design ■Pressure connection with integrated peak pressure aperture ■Accuracy hardly affected by temperature within entire range ‐40…+125°C ■Excellent EMC properties ■Patented medium stop system, leakage protection in case of a burst ■Pressure range 0…100 bar

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…100 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4 female thread, front sealing ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series o

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…100 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4 female thread, front sealing ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…100 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4 female thread, front sealing ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT

Pressure Transmitter – With Voltage Output (3-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…100 bar rel. ■12…33 VDC ■Analog output 0…10 V ■Process connection G1/4 female thread, front sealing ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with a fully wel

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…100 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with a

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…100 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 produ

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…100 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 produ

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…100 bar rel. ■10…30 VDC ■Analog output 4…20 mA ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 ■ATEX, IECEx ■Category II 1/2 GD, Ex zone 0 Functional principle The pressure sensors in the PT…‐2000 produ

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…100 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M12 × 1 Functional pri

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…100 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…100 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…100 bar rel. ■Pressure peak orifice ■7…33 VDC ■Analog output 4…20 mA ■Process connection 7/16 UNF (SAE) male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate w

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…100 bar rel. ■Pressure peak orifice ■7…33 VDC ■Analog output 4…20 mA ■Process connection 7/16 UNF (SAE) male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate w

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…100 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection R 1/4 male thread EN 10226 ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…100 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection R 1/4 male thread EN 10226 ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000