SD 控制IC

Phison PS8036 SD-to-Flash微控制IC乃特别为SD记忆卡与嵌入式NAND应用所设计。透过内建Enhanced BCH ECC，PS8036可在SPI与SD模式下支持1x/1y/1/z奈米闪存。由于其采用Programmable RAM，韧体可随时进行更新，此功能使得成品在设计上具备更大的弹性。 重点规格\r\n• 内建Enhanced ECC circuit (BCH)\r\n• 支援1x8 Flash I/O\r\n• 采用55奈米CMOS制程 \r\n• 内建支持 1.8V,3.3V闪存 I/O接口的调节器\r\n• 支持SD/SPI模式\r\n• 支援1x/1y/1z奈米闪存 \r\n• 支援MLC large block (4/8/16KB page) NAND闪存 \r\n• 内建静态与动态wear-leveling\r\n• 支援CPRM;

Low Distortion, Wide Bandwidth Voltage Feedback Clamp Amps

PRODUCT DESCRIPTION The AD8036 and AD8037 are wide bandwidth, low distortion clamping amplifiers. The AD8036 is unity gain stable. The AD8037 is stable at a gain of two or greater. These devices allow the designer to specify a high (VCH) and low (VCL) output clamp voltage. The output signal will

Low Distortion, Wide Bandwidth Voltage Feedback Clamp Amps

PRODUCT DESCRIPTION The AD8036 and AD8037 are wide bandwidth, low distortion clamping amplifiers. The AD8036 is unity gain stable. The AD8037 is stable at a gain of two or greater. These devices allow the designer to specify a high (VCH) and low (VCL) output clamp voltage. The output signal will

Silicon planar type

Silicon planar type For stabilization of power supply ■Features •Extremely low noise voltage caused from the diode (2.4V to 39V, 1/3 to 1/10 of our conventional MAZ3000 series) •Extremely good rising performance (in the low-current range) •Easy-to-select the optimum diode because

Silicon planar type

Silicon planar type For stabilization of power supply ■Features •Extremely low noise voltage caused from the diode (2.4V to 39V, 1/3 to 1/10 of our conventional MAZ3000 series) •Extremely good rising performance (in the low-current range) •Easy-to-select the optimum diode because

Silicon planar type

Silicon planar type For stabilization of power supply ■Features •Extremely low noise voltage caused from the diode (2.4V to 39V, 1/3 to 1/10 of our conventional MAZ3000 series) •Extremely good rising performance (in the low-current range) •Easy-to-select the optimum diode because