Multi-rate Telecom Backplane SERDES for 2.5 Gbit/s Interconnect

FEATURES • High performance backplane interface and cross-connect for 2.5G line cards in SONET/SDH systems. • Provides one low-speed parallel TelecomBus interface operating at 32 bits x 77.76 MHz. • Provides three high-speed multi-rate serial backplane interfaces. • Supports CLOS and m

TBS-2488 Backplane Interface & Cross-Connect

The PM5309 TBS-2488 is a high performance backplane interface and cross-connect solution for 2.5G line cards in SONET/SDH systems.\n\n Applications• Multi-service Provisioning Platforms• SONET/SDH Digital Cross-connects• SONET/SDH Add/Drop and Terminal Multiplexers\n\n\n\n Provides one low-speed parallel TelecomBus interface operating at 32 bits x 77.76 MHz\nProvides three high-speed multi-rate serial backplane interfaces\nSupports CLOS and memory-based switch fabric systems\nSupports linear, UPSR, and BLSR protection strategies\nImplements a 10G memory switch fabric ;

MICROPROCESSOR

功能：SONET/SDH 包装：托盘 描述：IC TELECOM INTERFACE 集成电路（IC） 电信

CURRENT REGULATOR CHIPS

• 1N5283 THRU 1N5314 AVAILABLE IN JANHC AND JANKC PER MIL-PRF-19500/463 • CURRENT REGULATOR CHIPS • ALL JUNCTIONS COMPLETELY PROTECTED WITH SILICON DIOXIDE • ELECTRICALLY EQUIVALENT TO 1N5283 THRU 1N5314 • CONSTANT CURRENT OVER WIDE VOLTAGE RANGE • COMPATIBLE WITH ALL WIRE BONDING AND DIE ATT

CURRENT REGULATOR DIODES

• 1N5283UR-1 THRU 1N5314UR-1 AVAILABLE IN JAN, JANTX, JANTXV AND JANS PER MIL-PRF-19500/463 • CURRENT REGULATOR DIODES • LEADLESS PACKAGE FOR SURFACE MOUNT • METALLURGICALLY BONDED • DOUBLE PLUG CONSTRUCTION

JIGH RELIABILITY CURRENT REGULATOR DIODES

HIGH RELIABILITY CURRENT REGULATOR DIODES

PLASTIC ENCAPSULATED DEVICES

General Description The MAX5308/MAX5309 are 10-bit, eight channel, low power, voltage-output, digital-to-analog converters (DACs) in a space-saving 16-pin TSSOP package. The wide +2.7V to +5.5V supply voltage range and less than 215µA (max) supply current per DAC are excellent for low-power and l

Single Phase Bridge Rectifier 4 Amp

Features: ● Ideal for Printed Circuit Board ● Surge Overload Rating: 200A (Peak)