32-50 WATTS DC/DC SINGLE - DUAL

文件：484.33 Kbytes Page：1 Pages

PM500 Medical & ITE Power Supplies (450-500W)

Description: The PM500 series of AC-DC switching power supplies in a package of 4 x 7 x 1.7 inches are capable of delivering 450-500 watts of continuous power at 30 CFM forced air cooling or 350-400 watts at convection cooling. The units are constructed on a printed circuit board with a U-bracket

PowerLogic™ PM5000 series Technical Datasheet

Applications Capable of essential cost management: • Sub-billing/tenant metering (+1) • Equipment sub-billing • Energy cost allocation Also ideal for electrical network management: • Track real-time power conditions • Monitor control functions • Provide basic power quality values • Detect

Enclosed Power Supply 28V 500 Watt

The PM500 series of AC-DC switching power supplies in a package of 4 x 7 x 1.7 inches are capable of delivering 450-500 watts of continuous power at 30 CFM forced air cooling or 350-400 watts at convection cooling. The units are constructed on a printed circuit board with a U-bracket for mechanical • BF Class insulation\n• 100-240 VAC input with active PFC , >0.9 P.F.\n• EN55011 / 55022 Class B conducted emissions\n• Compliant with RoHS requirements\n• Power consumption in standby mode less than 1W at standby power 5V/100mA;

Switchtec PFX 36xG5 Fanout PCIe® Switch

The Switchtec PFX 36xG5 Fanout PCIe® Switch is high-reliability PCIe switch supporting  36 lanes, 20 ports and hot- and surprise-plug controllers for each port.  This switch features advanced error containment and comprehensive diagnostics and debug capabilities, a wide breadth of I/O interfaces and • High-reliability PCIe: robust error containment, hot- and surprise-plug controllers per port, end-to-end data integrity protection, ECC protection on RAMs\n• Significant power, cost and board space savings with support for 20 ports and 10 virtual switch partitions and flexible *x1, x2, x4, x8, and;

Switchtec PFX 68xG5 Fanout PCIe® Switch

The Switchtec PFX 68xG5 Fanout PCIe® Switch is high-reliability PCIe switch supporting  68 lanes, 36 ports and hot- and surprise-plug controllers for each port.  This switch features advanced error containment and comprehensive diagnostics and debug capabilities, a wide breadth of I/O interfaces and • High-reliability PCIe: robust error containment, hot- and surprise-plug controllers per port, end-to-end data integrity protection, ECC protection on RAMs\n• Significant power, cost and board space savings with support for 36 ports and 18 virtual switch partitions and flexible *x1, x2, x4, x8, and;

PM500F Medical & ITE Class Power Supplies

Description: The PM500F series of AC-DC switching power supplies in a package of 3.98 x 7.09 x 1.56 inches are capable of delivering 450-500 watts of continuous power at 30 CFM forced air cooling or 250 watts at convection cooling. The units are constructed on a printed circuit board with a U-bra

PM500F Medical & ITE Class Power Supplies

Description: The PM500F series of AC-DC switching power supplies in a package of 3.98 x 7.09 x 1.56 inches are capable of delivering 450-500 watts of continuous power at 30 CFM forced air cooling or 250 watts at convection cooling. The units are constructed on a printed circuit board with a U-bra

PM500F Medical & ITE Class Power Supplies

Description: The PM500F series of AC-DC switching power supplies in a package of 3.98 x 7.09 x 1.56 inches are capable of delivering 450-500 watts of continuous power at 30 CFM forced air cooling or 250 watts at convection cooling. The units are constructed on a printed circuit board with a U-bra

PM500F Medical & ITE Class Power Supplies

Description: The PM500F series of AC-DC switching power supplies in a package of 3.98 x 7.09 x 1.56 inches are capable of delivering 450-500 watts of continuous power at 30 CFM forced air cooling or 250 watts at convection cooling. The units are constructed on a printed circuit board with a U-bra

PM500F Medical & ITE Class Power Supplies

Description: The PM500F series of AC-DC switching power supplies in a package of 3.98 x 7.09 x 1.56 inches are capable of delivering 450-500 watts of continuous power at 30 CFM forced air cooling or 250 watts at convection cooling. The units are constructed on a printed circuit board with a U-bra

PM500F Medical & ITE Class Power Supplies

Description: The PM500F series of AC-DC switching power supplies in a package of 3.98 x 7.09 x 1.56 inches are capable of delivering 450-500 watts of continuous power at 30 CFM forced air cooling or 250 watts at convection cooling. The units are constructed on a printed circuit board with a U-bra

PM500F Medical & ITE Class Power Supplies

Description: The PM500F series of AC-DC switching power supplies in a package of 3.98 x 7.09 x 1.56 inches are capable of delivering 450-500 watts of continuous power at 30 CFM forced air cooling or 250 watts at convection cooling. The units are constructed on a printed circuit board with a U-bra

PM500F Medical & ITE Class Power Supplies

Description: The PM500F series of AC-DC switching power supplies in a package of 3.98 x 7.09 x 1.56 inches are capable of delivering 450-500 watts of continuous power at 30 CFM forced air cooling or 250 watts at convection cooling. The units are constructed on a printed circuit board with a U-bra

PM500F Medical & ITE Class Power Supplies

Description: The PM500F series of AC-DC switching power supplies in a package of 3.98 x 7.09 x 1.56 inches are capable of delivering 450-500 watts of continuous power at 30 CFM forced air cooling or 250 watts at convection cooling. The units are constructed on a printed circuit board with a U-bra

PM500F Medical & ITE Class Power Supplies

Description: The PM500F series of AC-DC switching power supplies in a package of 3.98 x 7.09 x 1.56 inches are capable of delivering 450-500 watts of continuous power at 30 CFM forced air cooling or 250 watts at convection cooling. The units are constructed on a printed circuit board with a U-bra

SILICON N-CHANNEL POWER MOS FET MODULE HIGH SPEED POWER SWITCHING

Features • Equipped with Power MOS FET • Low on-resistance • High speed switching • Low drive current • Wide area of safe operation • Inherent parallel diode between source and drain • Isolated base from Terminal • Suitable for motor driver, switching regulator and etc. Application Hi

P-Channel 30 V (D-S) MOSFET

FEATURES • TrenchFET® Power MOSFET • 100 Rg Tested APPLICATIONS • For Mobile Computing - Load Switch - Notebook Adaptor Switch - DC/DC Converter

Intellimod??Module MAXISS Series??Multi AXIS Servo IPM (50 Amperes/600 Volts)

Description: Powerex Intellimod™ Intelligent Power Modules are isolated base modules designed for power switching applications operating at frequencies to 20kHz. Built-in control circuits provide optimum gate drive and protection for the IGBT and free-wheel diode power devices. Features: □ Comp

FLAT-BASE TYPE INSULATED PACKAGE

FEATURE a) Adopting 4th generation IGBT chip, which performance is improved by 1µm fine rule process. For example, typical Vce(sat)=1.7V b) Using new Diode which is designed to get soft reverse recovery characteristics. c) Over-temperature protection by detecting Tj of the IGBT chips • 3φ

FLAT-BASE TYPE INSULATED PACKAGE

FEATURE a) Adopting new 5th generation IGBT (CSTBT) chip, which performance is improved by 1µm fine rule process. For example, typical Vce(sat)=1.5V @Tj=125°C b) I adopt the over-temperature conservation by Tj detection of CSTBT chip, and error output is possible from all each conservation u

FLAT-BASE TYPE INSULATED PACKAGE

FEATURE a) Adopting new 5th generation IGBT (CSTBT) chip, which performance is improved by 1µm fine rule process. For example, typical Vce(sat)=1.9V @Tj=125°C b) I adopt the over-temperature conservation by Tj detection of CSTBT chip, and error output is possible from all each conservation u

FLAT-BASE TYPE INSULATED PACKAGE

FEATURE a) Adopting new 4th generation planar IGBT chip, which performance is improved by 1µm fine rule process. For example, typical VCE(sat)=1.7V b) Using new Diode which is designed to get soft reverse recovery characteristics. c) Keeping the package compatibility. The layout/positio

Intellimod??Module Three Phase IGBT Inverter Output (50 Amperes/600 Volts)

Description: Powerex Intellimod™ Intelligent Power Modules are isolated base modules designed for power switching applications operating at frequencies to 20kHz. Built-in control circuits provide optimum gate drive and protection for the IGBT and free-wheel diode power devices. Features: □ Comp

Intellimod??Module Three Phase IGBT Inverter Output (50 Amperes/1200 Volts)

Description: Powerex Intellimod™ Intelligent Power Modules are isolated base modules designed for power switching applications operating at frequencies to 20kHz. Built-in control circuits provide optimum gate drive and protection for the IGBT and free-wheel diode power devices. Features: □ Comp

FLAT-BASE TYPE INSULATED PACKAGE

FEATURE a) Adopting new 4th generation planar IGBT chip, which performance is improved by 1µm fine rule process. b) Using new Diode which is designed to get soft reverse recovery characteristics. c) Keeping the package compatibility. The layout/position of both terminal pin and mounting hol

FLAT-BASE FLAT-BASE TYPE INSULATED PACKAGE

FEATURE a) Adopting new 4th generation planar IGBT chip, which performance is improved by 1µm fine rule process. For example, typical VCE(sat)=1.7V b) Using new Diode which is designed to get soft reverse recovery characteristics. • 3φ 50A, 600V Current-sense IGBT for 15kHz switching • Mon

FLAT-BASE TYPE INSULATED PACKAGE

FEATURE a) Adopting new 4th generation planar IGBT chip, which performance is improved by 1µm fine rule process. b) Using new Diode which is designed to get soft reverse recovery characteristics. • 3φ 50A, 1200V Current-sense IGBT for 15kHz switching • Monolithic gate drive & protection lo

FLAT-BASE TYPE INSULATED PACKAGE

FLAT-BASE TYPE INSULATED PACKAGE ● 600V, 50A Current-sense 6kHz IGBT type inverter ● Built in IGBT gate drive circuit ● Built in Faule OC, SC, OT & UV protection Fault output ● 3.7kW class inverter application APPLICATION Air conditioner, mortor control

包装：盒 描述：FERRITE CORE 2PC SET 磁性元件 - 变压器，电感器元件 铁氧体磁芯

Single, dual and triple output 1 to 10.5 Watt AC/DC encapsulated modules

文件：65.97 Kbytes Page：3 Pages

Common mode chokes with Ferrite cores

文件：378.07 Kbytes Page：5 Pages

包装：盒 描述：AC/DC CONVERTER 12V 350W 电源 - 外部/内部（板外） AC DC 转换器

Single, dual and triple output 1 to 10.5 Watt AC/DC encapsulated modules

文件：46.83 Kbytes Page：2 Pages

Single, dual and triple output 1 to 10.5 Watt AC/DC encapsulated modules

文件：65.97 Kbytes Page：3 Pages

Single, dual and triple output 1 to 10.5 Watt AC/DC encapsulated modules

文件：46.83 Kbytes Page：2 Pages

Single, dual and triple output 1 to 10.5 Watt AC/DC encapsulated modules

文件：65.97 Kbytes Page：3 Pages

Single, dual and triple output 1 to 10.5 Watt AC/DC encapsulated modules

文件：65.97 Kbytes Page：3 Pages

SMD Power Inductor

文件：267.77 Kbytes Page：2 Pages

PM5022 Series SMD Power Inductor

文件：334.63 Kbytes Page：2 Pages

SMD Power Inductor

文件：267.77 Kbytes Page：2 Pages

PM5022 Series - SMD Power Inductor

文件：334.63 Kbytes Page：2 Pages

PM5022 Series - SMD Power Inductor

文件：334.63 Kbytes Page：2 Pages

SMD Power Inductor

文件：267.77 Kbytes Page：2 Pages

PM5022 Series SMD Power Inductor

文件：334.63 Kbytes Page：2 Pages

SMD Power Inductor

文件：267.77 Kbytes Page：2 Pages

SMD Power Inductor

文件：267.77 Kbytes Page：2 Pages

PM5022 Series - SMD Power Inductor

文件：334.63 Kbytes Page：2 Pages

PM5022 Series SMD Power Inductor

文件：334.63 Kbytes Page：2 Pages

SMD Power Inductor

文件：267.77 Kbytes Page：2 Pages

PM5022 Series SMD Power Inductor

文件：334.63 Kbytes Page：2 Pages

PM5022 Series - SMD Power Inductor

文件：334.63 Kbytes Page：2 Pages

SMD Power Inductor

文件：267.77 Kbytes Page：2 Pages

PM5022 Series - SMD Power Inductor

文件：334.63 Kbytes Page：2 Pages

SMD Power Inductor

文件：267.77 Kbytes Page：2 Pages

PM5022 Series SMD Power Inductor

文件：334.63 Kbytes Page：2 Pages

SMD Power Inductor

文件：267.77 Kbytes Page：2 Pages

SMD Power Inductor

文件：267.77 Kbytes Page：2 Pages

PM5022 Series SMD Power Inductor

文件：334.63 Kbytes Page：2 Pages

PM5022 Series - SMD Power Inductor

文件：334.63 Kbytes Page：2 Pages