C Female Connector Solder Attachment 4 Hole Flange Solder Cup Terminal, .718 inch Hole Spacing

Description Pasternack’s PE4241 type C female connector solder attachment 4 hole flange mount solder cup terminal, .718 inch hole spacing is part of our full line of RF components available for same-day shipping. Our type C female connector operates up to a maximum frequency of 10 GHz and offers

SPDT UltraCMOS??RF Switch

Product Description The PE4241 UltraCMOS™ RF Switch is designed to cover a broad range of applications from DC through 3.0 GHz. This reflective switch integrates on-board CMOS control logic with a low voltage CMOS-compatible control interface, and can be controlled using either single-pin or comp

C Female Connector Solder Attachment 4 Hole Flange Mount Solder Cup Terminal, .718 inch Hole Spacing

C Female Connector Solder Attachment 4 Hole Flange Mount Solder Cup Terminal, .718 inch Hole Spacing\n\nPE4241 type C female 4 hole flange terminal connector has an interface type of solder cup and a 50 Ohm impedance. Pasternack type C female 4 hole flange connector uses shield/contact solder as an Key Specifications (Click on Data Sheet Above for Additional Details).\n• PolarityStandard\n• Connector SeriesC\n• Connector GenderFemale\n• Impedance50 Ohm\n• Body StyleStraight\n• Attachment MethodSolder\n• Mount Method4 Hole Flange\n• Minimum FrequencyDC\n• Maximum Frequency10 GHz\n• Interface Ty;

SPDT UltraCMOS™ RF Switch

C Female Connector Solder Attachment 4 Hole Flange Mount Solder Cup Terminal,

文件：352.56 Kbytes Page：3 Pages

SP12T RF Switch, 10 MHz?? GHz

Product Description The PE42412 is a HaRP™ technology-enhanced absorptive SP12T RF switch that supports a frequency range from 10 MHz to 8 GHz. It delivers high isolation, low insertion loss and fast switching time, making this device ideal for filter bank switching and RF signal routing in wirel

UltraCMOS® SP12T RF Switch

The PE42412 is a HaRP™ technology-enhanced absorptive SP12T RF switch that supports a frequency range from 10 MHz to 8 GHz. It delivers high isolation, low insertion loss and fast switching time, making this device ideal for filter bank switching and RF signal routing in wireless infrastructure and • High isolation: 39 dB @ 6 GHz\n• Low insertion loss: 1.3 dB @ 6 GHz\n• Fast switching time of 232 ns\n• Power handling of 33 dBm CW\n• Logic select (LS) pin provides maximum control logic flexibility\n• Terminated all-off state mode\n• Packaging – 32-lead 5 × 5 × 0.85 mm QFN;

SP12T RF Switch, 10 MHz?? GHz

Product Description The PE42412 is a HaRP™ technology-enhanced absorptive SP12T RF switch that supports a frequency range from 10 MHz to 8 GHz. It delivers high isolation, low insertion loss and fast switching time, making this device ideal for filter bank switching and RF signal routing in wirel

SPDT UltraCMOS??RF Switch

Product Description The PE4241 UltraCMOS™ RF Switch is designed to cover a broad range of applications from DC through 3.0 GHz. This reflective switch integrates on-board CMOS control logic with a low voltage CMOS-compatible control interface, and can be controlled using either single-pin or comp

C Female Connector Solder Attachment 4 Hole Flange Mount Solder Cup Terminal,

文件：352.56 Kbytes Page：3 Pages

AF Power Amplifier (Split Power Supply) (120W120W min, THD = 0.08)

Features • Muting circuit built-in to isolate all types of shock noise • Current mirror circuit for low 0.08 total harmonic distortion • Pin compatible with the STK4201II series (THD =0.4) and the STK4141X series (THD = 0.02)

2ch AF Power Amplifier (Split Power Supply) (120W 120W min, THD = 0.4)?

Features • Muting circuit built-in to isolate all types of shock noise • Current mirror circuit for low 0.08 total harmonic distortion • Pin compatible with the STK4201V series (THD =0.08) and the STK4141X series (THD = 0.02)

2ch AF Power Amplifier (Split Power Supply) (120W 120W min, THD = 0.4)?

Features • Muting circuit built-in to isolate all types of shock noise • Current mirror circuit for low 0.08 total harmonic distortion • Pin compatible with the STK4201V series (THD =0.08) and the STK4141X series (THD = 0.02)

AF Power Amplifier (Split Power Supply) (120W120W min, THD = 0.08)

Features • Muting circuit built-in to isolate all types of shock noise • Current mirror circuit for low 0.08 total harmonic distortion • Pin compatible with the STK4201II series (THD =0.4) and the STK4141X series (THD = 0.02)

Single-Supply, MicroPOWER OPERATIONAL AMPLIFIERS

文件：268.92 Kbytes Page：10 Pages