SPDT High Power UltraCMOS - DC 1.3 GHz RF Switch

Product Description The PE4231 SPDT High Power UltraCMOS™ RF Switch is designed to cover a broad range of applications from DC to 1.3 GHz. This single-supply reflective switch integrates on-board CMOS control logic driven by a simple, single-pin CMOS or TTL compatible control input. Using a nomin

SC Male Connector Crimp/Solder Attachment

Description Pasternack’s PE4231 SC male connector with crimp/solder attachment for RG55, RG141, RG142, RG223 and RG400 is part of our full line of RF components available for same-day shipping. Features • Silver Plated Contact • Contact plating according to QQ-S-365 Applications • General Pu

SC Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400

SC Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400\n\nPE4231 SC male coaxial connector has an interface type of RG55, RG141, RG142, RG223, RG400 and a 50 Ohm impedance. Pasternack SC male connector uses shield/contact crimp/solder as an attachment method.\n\nThe Pasternac Key Specifications (Click on Data Sheet Above for Additional Details).\n• Connector SeriesSC\n• Impedance50 Ohm\n• Attachment MethodCrimp/Solder\n• Interface Type 1RG55\n• Interface Type 3RG142\n• Interface Type 5RG400;

SPDT High Power UltraCMOS - DC 1.3 GHz RF Switch

Product Description The PE4231 SPDT High Power UltraCMOS™ RF Switch is designed to cover a broad range of applications from DC to 1.3 GHz. This single-supply reflective switch integrates on-board CMOS control logic driven by a simple, single-pin CMOS or TTL compatible control input. Using a nomin

High-Output-Drive, 10MHz, 10V/Us, Rail-to-Rail I/O Op Amps with Shutdown in SC70

General Description The MAX4230–MAX4234 single/dual/quad, high-output drive CMOS op amps feature 200mA of peak output current, rail-to-rail input, and output capability from a single 2.7V to 5.5V supply. These amplifiers exhibit a high slew rate of 10V/µs and a gain-bandwidth product (GBWP) of 10

2-Channel 100W min AF Power Amp(Dual Supplies), Thick Film Hybrid IC

2-Channel 100W min AF Power Amp(Dual supplies)

AF Power Amplifier(Split Power Supply)(100W100W min, THD=0.08)

AF Power Amplifier (Split Power Supply) (100W+100W min, THD = 0.08) Features • Muting circuit built-in to isolate all types of shock noise • Current mirror circuit for low 0.08 total harmonic distortion • Pin compatible with the STK4201II series (THD = 0.4) and the STK4141X series

2-Channel 100W min AF Power Amp(Dual Supplies), Thick Film Hybrid IC

2-Channel 100W min AF Power Amp(Dual supplies)

AF Power Amplifier(Split Power Supply)(100W100W min, THD=0.08)

AF Power Amplifier (Split Power Supply) (100W+100W min, THD = 0.08) Features • Muting circuit built-in to isolate all types of shock noise • Current mirror circuit for low 0.08 total harmonic distortion • Pin compatible with the STK4201II series (THD = 0.4) and the STK4141X series