CK98R 100/133MHz RCC spread spectrum system clock generator

DESCRIPTION The PCK2010R is a clock generator (frequency synthesizer) chip for a Pentium II and other similar processors. The PCK2010R has four CPU clock outputs at 2.5 V, two CPUDIV2 clock outputs running at CPU clock frequency (66 MHz or 50 MHz depending on the state of SEL133/100) and four 3

CK98R 100/133MHz RCC spread spectrum system clock generator

CK98R 100/133MHz RCC spread spectrum system clock generator

DESCRIPTION The PCK2010RA is a clock generator (frequency synthesizer) chip for a Pentium II and other similar processors. The PCK2010RA has four CPU clock outputs at 2.5 V, two CPUDIV2 clock outputs running at 1/2 CPU clock frequency (66 MHz or 50 MHz depending on the state of SEL133/100) and f

CK98R 100/133MHz RCC spread spectrum system clock generator

DESCRIPTION The PCK2010RA is a clock generator (frequency synthesizer) chip for a Pentium II and other similar processors. The PCK2010RA has four CPU clock outputs at 2.5 V, two CPUDIV2 clock outputs running at 1/2 CPU clock frequency (66 MHz or 50 MHz depending on the state of SEL133/100) and f

CK98R (100/133MHz) RCC spread spectrum system clock generator

CK98R 100/133MHz RCC spread spectrum system clock generator

DESCRIPTION The PCK2010R is a clock generator (frequency synthesizer) chip for a Pentium II and other similar processors. The PCK2010R has four CPU clock outputs at 2.5 V, two CPUDIV2 clock outputs running at CPU clock frequency (66 MHz or 50 MHz depending on the state of SEL133/100) and four 3

IN-LINE GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes)

FEATURES • Plastic material has Underwriters Laboratory Flammability Classification 94V-O • Ideal for printed circuit board • Reliable low cost construction utilizing molded plastic technique • Surge overload rating : 60 Amperes peak

GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes)

VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes FEATURES Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound 2.0 ampere operation at TA=55 ¢J with no thermal runaway Exceeds environmental standards

PLASTIC SILICON RECTIFIER(VOLTAGE 50 to 1000 Volts CURRENT - 2.0 Amperes)

VOLTAGE 50 to 1000 Volts CURRENT - 2.0 Amperes FEATURES • Low cost • High current capability • Plastic package has Underwriters Laboratories Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound. • 2.0 ampere operation at TA = 55°C with no thermal runawa

POWER RECTIFIERS(20A,50-200V)

Switchmode Full Plastic Dual Ultrafast Power Rectifiers ... Designed for use in switching power supplies, inverters and as free wheeling diodes. These state-of-the-art devices have the following features: ✱ High Surge Capacity ✱ Low Power Loss, High Efficiency ✱ Glass Passivated chip junction

COMPENSATED PRESSURE SENSOR

文件：91.75 Kbytes Page：4 Pages