PCA9554A Remote 8-Bit I2C and SMBus I/O Expander With Interrupt Output and Configuration Registers

1 Features • I2C to Parallel Port Expander • Open-Drain Active-Low Interrupt Output • Operating Power-Supply Voltage Range of 2.3 V to 5.5 V • 5-V Tolerant I/Os • 400-kHz Fast I2C Bus • Three Hardware Address Pins Allow up to Eight Devices on the I2C/SMBus • Input/Output Configuration Reg

8-bit I2C and SMBus I/O port with interrupt

DESCRIPTION The PCA9554 and PCA9554A are 16-pin CMOS devices that provide 8 bits of General Purpose parallel Input/Output (GPIO) expansion for I2C/SMBus applications and were developed to enhance the Philips family of I C I/O expanders. The improvements include higher drive capability, 5V I/O t

8-bit I2C and SMBus I/O port with interrupt

DESCRIPTION The PCA9554 and PCA9554A are 16-pin CMOS devices that provide 8 bits of General Purpose parallel Input/Output (GPIO) expansion for I2C/SMBus applications and were developed to enhance the Philips family of I C I/O expanders. The improvements include higher drive capability, 5V I/O t

8-bit I2C and SMBus I/O port with interrupt

DESCRIPTION The PCA9554 and PCA9554A are 16-pin CMOS devices that provide 8 bits of General Purpose parallel Input/Output (GPIO) expansion for I2C/SMBus applications and were developed to enhance the Philips family of I C I/O expanders. The improvements include higher drive capability, 5V I/O t

8-bit I2C and SMBus I/O port with interrupt

DESCRIPTION The PCA9554 and PCA9554A are 16-pin CMOS devices that provide 8 bits of General Purpose parallel Input/Output (GPIO) expansion for I2C/SMBus applications and were developed to enhance the Philips family of I C I/O expanders. The improvements include higher drive capability, 5V I/O t

5V Input, 3A Output Current 3.3V, 2.5V 1.8V, 1.5V Output Switching Regulator Three Terminal Package

[Omnirel] DESCRIPTION The OM955X series of Switching Regulators are designed for pin compatibility with standard 3- Pin linear regulators. They are well suited for on-board, non- isolated power applications where efficient point- of- load regulation is needed. The package is designed using Chip-