8-bit I2C and SMBus I/O port with interrupt, 2-kbit EEPROM and 6 address pins

DESCRIPTION The PCA9501 is an 8-bit I/O expander with an on-board 2-kbit EEPROM. The I/O expandable eight quasi bidirectional data pins can be independently assigned as inputs or outputs to monitor board level status or activate indicator devices such as LEDs. The system master writes to the I/O

8-bit I2C-bus and SMBus I/O port with interrupt, 2-kbit EEPROM and 6 address pins

8-bit I2C-bus and SMBus I/O port with interrupt, 2-kbit EEPROM and 6 address pins

I2C Demonstration Board 2005-1 Quick Start Guide

文件：268.36 Kbytes Page：12 Pages

封装/外壳：20-SOIC（0.295"，7.50mm 宽） 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC I/O EXPANDER I2C 8B 20SOIC 集成电路（IC） I/O 扩展器

Digitally Programmable Delay Generator

GENERAL DESCRIPTION The AD9501 is a digitally programmable delay generator which provides programmed time delays of an input pulse. Operating from a single +5 V supply, the AD9501 is TTL- or CMOS compatible, and is capable of providing accurate timing adjustments with resolutions as low as 10 ps.

Digitally Programmable Delay Generator

GENERAL DESCRIPTION The AD9501 is a digitally programmable delay generator which provides programmed time delays of an input pulse. Operating from a single +5 V supply, the AD9501 is TTL- or CMOS compatible, and is capable of providing accurate timing adjustments with resolutions as low as 10 ps.

12-Bit, Voltage Output D/A Converter

DESCRIPTION… The SP9501 is a low power 12-Bit Digital-to-Analog Converter. It features ±4.5V output swings when using ±5 volt supplies. The converter uses a standard 3–wire serial interface compatible with SPI™, QSPI™ and Microwire™. The output settling-time is specified at 4µs. The SP9501 is ava

12-Bit, Voltage Output D/A Converter

DESCRIPTION… The SP9501 is a low power 12-Bit Digital-to-Analog Converter. It features ±4.5V output swings when using ±5 volt supplies. The converter uses a standard 3–wire serial interface compatible with SPI™, QSPI™ and Microwire™. The output settling-time is specified at 4µs. The SP9501 is ava

531/1063 Mbaud Fibre Channel Transmitter and Receiver

TriQuint’s Fibre Channel transmitter (TQ9501) and receiver (TQ9502) are part of the FC531/FC1063 (Fibre Channel 531 and 1063 Megabaud) chip set. In addition to the transmitter and receiver, TriQuint offers the ENcoder/DECoder (TQ9303 ENDEC). The TQ9501, TQ9502, TQ9303 and a gigabit fiber optic mod