8-bit I2C and SMBus I/O port with 2-kbit EEPROM

DESCRIPTION The PCA9500 is an 8-bit I/O expander with an on-board 2-kbit EEPROM. The I/O expander’s eight quasi bidirectional data pins can be independently assigned as inputs or outputs to monitor board level status or activate indicator devices such as LEDs. The system master writes to

8-bit I2C and SMBus I/O port with 2-kbit EEPROM

文件：169.44 Kbytes Page：23 Pages

8-bit I2C-bus and SMBus I/O port with 2-kbit EEPROM

Smart, simple solutions for the 12 most common design concerns

8-bit I2C-bus and SMBus I/O port with 2-kbit EEPROM

8-bit I2C and SMBus I/O port with 2-kbit EEPROM

DESCRIPTION The PCA9500 is an 8-bit I/O expander with an on-board 2-kbit EEPROM. The I/O expander’s eight quasi bidirectional data pins can be independently assigned as inputs or outputs to monitor board level status or activate indicator devices such as LEDs. The system master writes to

8-bit I2C and SMBus I/O port with 2-kbit EEPROM

DESCRIPTION The PCA9500 is an 8-bit I/O expander with an on-board 2-kbit EEPROM. The I/O expander’s eight quasi bidirectional data pins can be independently assigned as inputs or outputs to monitor board level status or activate indicator devices such as LEDs. The system master writes to

8-bit I2C-bus and SMBus I/O port with 2-kbit EEPROM

8-bit I2C-bus and SMBus I/O port with 2-kbit EEPROM

8-bit I2C and SMBus I/O port with 2-kbit EEPROM

DESCRIPTION The PCA9500 is an 8-bit I/O expander with an on-board 2-kbit EEPROM. The I/O expander’s eight quasi bidirectional data pins can be independently assigned as inputs or outputs to monitor board level status or activate indicator devices such as LEDs. The system master writes to

8-bit I2C-bus and SMBus I/O port with 2-kbit EEPROM

8-bit I2C and SMBus I/O port with 2-kbit EEPROM

文件：169.44 Kbytes Page：23 Pages

封装/外壳：16-VQFN 裸露焊盘 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC I/O EXPANDER 8BIT 16HVQFN 集成电路（IC） I/O 扩展器

8-bit I2C and SMBus I/O port with 2-kbit EEPROM

文件：169.44 Kbytes Page：23 Pages

8-bit I2C-bus and SMBus I/O port with 2-kbit EEPROM

封装/外壳：16-SOIC（0.295"，7.50mm 宽） 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC I/O EXPANDER I2C 8B 16SOIC 集成电路（IC） I/O 扩展器

8-bit I2C-bus and SMBus I/O port with 2-kbit EEPROM

8-bit I2C and SMBus I/O port with 2-kbit EEPROM

文件：169.44 Kbytes Page：23 Pages

Dual-band, CDMA/AMPS downconverter IC

DESCRIPTION The SA9500 integrates all the front end receive mixers necessary for use in dual-band, triple-mode CDMA/AMPS cellular phone handsets. There are three individual mixer blocks, each optimised for high linearity with low power consumption for operation in one of the following modes: High

Dual-band, CDMA/AMPS downconverter IC

DESCRIPTION The SA9500 integrates all the front end receive mixers necessary for use in dual-band, triple-mode CDMA/AMPS cellular phone handsets. There are three individual mixer blocks, each optimised for high linearity with low power consumption for operation in one of the following modes: High

12-Bit, Voltage Output D/A Converter

DESCRIPTION… The SP9500 is a low power 12-Bit Digital-to-Analog Converter. It features 0.5 to 4.5V output swing when using +5volt supply. The converter uses a standard 3–wire serial interface compatible with SPI™, QSPI™ and Microwire™. The output settling-time is specified at 7.5µs. The SP9500 is

12-Bit, Voltage Output D/A Converter

DESCRIPTION… The SP9500 is a low power 12-Bit Digital-to-Analog Converter. It features 0.5 to 4.5V output swing when using +5volt supply. The converter uses a standard 3–wire serial interface compatible with SPI™, QSPI™ and Microwire™. The output settling-time is specified at 7.5µs. The SP9500 is

12-Bit, Voltage Output D/A Converter

DESCRIPTION… The SP9500 is a low power 12-Bit Digital-to-Analog Converter. It features 0.5 to 4.5V output swing when using +5volt supply. The converter uses a standard 3–wire serial interface compatible with SPI™, QSPI™ and Microwire™. The output settling-time is specified at 7.5µs. The SP9500 is