High Frequency Wire Wound Transformers

文件：426.44 Kbytes Page：4 Pages

ER9.5/ER11/ER14 series SMT Transformer Series, Up To 9W

12-bit, serial IN, parallel OUT driver

The BU2090, BU2090F, BU2090FS, BU2092, BU2092F, and BU2092FV are 12-bit serial input, parallel output drivers. For the BU2090 / F / FS, data input is shifted to the 12-bit internal shift register on the rising edge of a clock pulse. On the falling edge of the pulse, if the DATA pin is HIGH, the

12-24GHz Frequency Multiplier

Description The CHX2090 is a cascadable by 2 frequency multiplier monolithic circuit. It is designed for a wide range of applications, from military to commercial communication systems. The backside of the chip is both RF and DC grounds. This helps simplify the assembly process. The circuit is m

12-24GHz Frequency Multiplier

Description The monolithic microwave IC (MMIC) in the package is a cascadable by 2 frequency multiplier. It is designed for a wide range of applications, from military to commercial communication systems. The circuit is manufactured with a PM-HEMT process, 0.25µm gate length, via holes through th

SWITCHMODE??Power Rectifiers

SWITCHMODE™ Power Rectifiers . . . using the Schottky Barrier principle with a platinum barrier metal. These state–of–the–art devices have the following features: • 20 Amps Total (10 Amps Per Diode Leg) • Guard–Ring for Stress Protection • Low Forward Voltage • 150°C Operating Junction Temper

Integrated Circuit 7-Channel Transistor Array

Description: The NTE2090 is an integrated circuit in a 16–Lead DIP type package comprised of six NPN low saturation drivers. All units feature integral clamp diodes for switching inductive loads and protective diodes for protection against a negative input voltage. Features: • Low Saturation