2WAY - 4WAY - 8WAY POWER DIVIDERS & COMBINERS

Stripline Construction Connectors SMA and Type N Compact and Lightweight RF Power 30 Watt with all ports matched

ASYNCHRONOUS SERIAL CONTROLLER

The IA82510 is a plug-and-play drop-in replacement for the original IC. Innovasic produces replacement ICs using its MILES™, or Managed IC Lifetime Extension System, cloning technology. This technology produces replacement ICs far more complex than emulation while ensuring they are compatible with

PROGRAMMABLE COMMUNICATION INTERFACE

PROGRAMMABLE COMMUNICATION INTERFACE The Intel® 8251A is the industry standard Universal Synchronous/Asynchronous Receiver/Transmitter (USART) designed for data communications with microprocessor families such as MCS-48, 80, 85, and iAPX 86, 88. The 8251A is used as a peripheral devic

PROGRAMMABLE COMMUNICATION INTERFACE 28-Pin DIP Package

The 8251A is the industry standard Universal Synchronous/Asynchronous Receiver/Transmitter (USART) designed for data communications with microprocessor families such as MCS-48, 80, 85, and iAPX 86, 88. The 8251A is used as a peripheral device and is programmed by the CPU to operate using

PROGRAMMABLE INTERVAL TIMER

PROGRAMMABLE INTERVAL TIMER

CMOS Programmable Interval Timer

The Intersil 82C54 is a high performance CMOS Programmable Interval Timer manufactured using an advanced 2 micron CMOS process. Features • 8MHz to 12MHz Clock Input Frequency • Compatible with NMOS 8254     - Enhanced Version of NMOS 8253 • Three Independent 16-Bit Counters • Six Programmabl

PROGRAMMABLE PERIPHEAL INTERFACE

PROGRAMMABLE PERIPHERAL INTERFACE The Intel 8255A is a general purpose programmable I/O device designed for use with Intel microprocessors.

PROGRAMMABLE PERIPHEAL INTERFACE

PROGRAMMABLE PERIPHERAL INTERFACE The Intel 8255A is a general purpose programmable I/O device designed for use with Intel microprocessors.

PROGRAMMABLE DMA CONTROLLER

PROGRAMMABLE DMA CONTROLLER

IEEE802.3 ETHERNET LAN COPROCESSOR

IEEE 802.3 ETHERNET LAN COPROCESSOR

PROGRAMMABLE INTERRUPT CONTROLLER

GENERAL DESCRIPTION The 8259A Programmable Interrupt Controller handles up to eight vectored priority interrupts for the CPU. It is cascadable for up to 64 vectored priority interrupts without additional circuitry. It is packaged in a 28-pin DIP, uses NMOS technology, and requires a single +5-V s

2WAY - 4WAY - 8WAY POWER DIVIDERS & COMBINERS

Stripline Construction Connectors SMA and Type N Compact and Lightweight RF Power 30 Watt with all ports matched

2WAY - 4WAY - 8WAY POWER DIVIDERS & COMBINERS

Stripline Construction Connectors SMA and Type N Compact and Lightweight RF Power 30 Watt with all ports matched

2WAY - 4WAY - 8WAY POWER DIVIDERS & COMBINERS

Stripline Construction Connectors SMA and Type N Compact and Lightweight RF Power 30 Watt with all ports matched

2WAY - 4WAY - 8WAY POWER DIVIDERS & COMBINERS

Stripline Construction Connectors SMA and Type N Compact and Lightweight RF Power 30 Watt with all ports matched

2WAY - 4WAY - 8WAY POWER DIVIDERS & COMBINERS

Stripline Construction Connectors SMA and Type N Compact and Lightweight RF Power 30 Watt with all ports matched

2WAY - 4WAY - 8WAY POWER DIVIDERS & COMBINERS

Stripline Construction Connectors SMA and Type N Compact and Lightweight RF Power 30 Watt with all ports matched

Asynchronous Serial Controller

文件：374.82 Kbytes Page：25 Pages

总线转UART

PROGRAMMABLE COMMUNICATION INTERFACE

PROGRAMMABLE INTERVAL TIMER

NPN power transistors

DESCRIPTION NPN power transistor in a TO-202; SOT128B plastic package. PNP complements: BD826 and BD830. FEATURES • High current (max. 1 A) • Low voltage (max. 80 V). APPLICATIONS • General purpose • Driver stages in hi-fi amplifiers and television circuits.

Integrated Circuit Battery Operated Audio Amp

Description: The NTE825 amplifier is an integrated circuit in a 14–Lead DIP type package optimized for 6V, 7.5V, and 9V operation into low impedance loads. The gain is internally set at 20 to keep the external part count low, but the addition of an external resistor and capacitor between Pin2 and

ALTERNISTORS

DESCRIPTION The TPDV 625 ---> 1225 use a high performance passivated glass alternistor technology. Featuring very high commutation levels and high surge current capability, this family is well adapted to power control on inductive load (motor, transformer...) ■ HIGH COMMUTATION : > 88 A/ms (400H

25A SCRs

DESCRIPTION The TYN / TN25 SCR Series is suitable for general purpose applications. Using clip assembly technology, they provide a superior performance in surge current capabilities.

25A SCRs

DESCRIPTION The TYN / TN25 SCR Series is suitable for general purpose applications. Using clip assembly technology, they provide a superior performance in surge current capabilities.

PROGRAMMABLE PERIPHEAL INTERFACE

Programmable Peripheral Interface iAPX86 Family

Programmable Peripheral Interface iAPX86 Family

PROGRAMMABLE PERIPHEAL INTERFACE

PROGRAMMABLE PERIPHEAL INTERFACE

PROGRAMMABLE PERIPHERAL INTERFACE

PROGRAMMABLE PERIPHERAL INTERFACE