ZENER OVERVOLTAGE TRANSIENT SUPPRESSORS

Zener Overvoltage Transient Suppressors The P6SMB6.8 series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener impedance and fast response time. The P6SMB6.8 series is supplied in

Unidirectional and Bidirectional Transient Voltage Suppressor diodes

Unidirectional and Bidirectional Transient Voltage Suppressor diodes Pulse Power Dissipation: 600 W Maximum Stand-off voltage: 5,5 342 V Features • Max. solder temperature: 260°C • Plastic material has UL classification 94V-0 • For bidirectional types (suffix C or CA) electrical characte

丝印代码：KNJ；Surface Mount Transient Voltage Suppressor

FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Built-in strain relief - Excellent clamping capability - Typical IR less than 1μA above 10V - Halogen-free according to IEC 61249-2-21 definition - Fast response time: Typically les

丝印代码：KS；SURFACE MOUNT TRANSIENT VOLTAGE SUPPESSOR DIODE

Features ● Glass Passivated Die Construction ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Material: UL Flammability Classification Rating 94V-0

Excellent clamping capability

Features ● Peak power dissipation 600W @10 x 1000 us Pulse ● Low profile package. ● Excellent clamping capability. ● Glass passivated junction. ● Fast response time: typically less than 1ps from 0 Volts to BV min ● Typical IR less than 1uA when VBR min above 12V. ● IEC 61000-4-2 ESD

表面贴装型瞬态抑制二极管

•10×1000μs波形时的峰值脉冲功率为600W，重复频率（工作循环）:0.01% \n• 出色的箝位能力 \n• 增量浪涌电阻较低 \n• 正常情况下，当VBR最小值>12V时，IR小于1μA \n• 经过优化的表面贴装可最大限度地减少对PCB空间的影响 \n• 小尺寸封装 \n• 由于超过最大额定值造成的典型故障模式为短路 \n• 锡丝测试基于JEDEC JESD201A表4a和4c \n• IEC 61000-4-2 ESD 30kV（空气放电），30kV（接触放电） \n• 数据线路EFT保护符合IEC 61000-4-4 \n• 内置式应力消除 \n• 快速的响应时间: t;

600W, 10V, 10%, Unidirectional, TVS

Axial diode

封装/外壳：DO-214AA，SMB 包装：卷带（TR） 描述：TVS DIODE 8.55VWM 15.23VC SMB 电路保护 TVS - 二极管

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

文件：99.86 Kbytes Page：3 Pages

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

文件：109.71 Kbytes Page：5 Pages

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER

文件：146.02 Kbytes Page：5 Pages

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watts

文件：246.61 Kbytes Page：7 Pages

6.8 to 440Volts 600Watts SMD TRANSIENT VOLTAGE SUPPRESSORS

文件：104.87 Kbytes Page：5 Pages

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

文件：335.86 Kbytes Page：5 Pages

丝印代码：KNJ；600 Watts Surface Mount Transient Voltage Suppressor

文件：630.99 Kbytes Page：4 Pages

丝印代码：KNJ；600W, 6.8V - 220V Surface Mount Transient Voltage Suppressor

文件：192.44 Kbytes Page：6 Pages

丝印代码：KNJ；600 Watts Suface Mount Transient Voltage Suppressor

文件：133.84 Kbytes Page：4 Pages

丝印代码：NE；SURFACE MOUNT TRANSIENT VOLTAGE SUPPESSOR DIODE

Features ● Glass Passivated Die Construction ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Material: UL Flammability Classification Rating 94V-0

ZENER OVERVOLTAGE TRANSIENT SUPPRESSORS

Zener Overvoltage Transient Suppressors The P6SMB6.8 series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener impedance and fast response time. The P6SMB6.8 series is supplied in

丝印代码：MWJ；Surface Mount Transient Voltage Suppressor

FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Built-in strain relief - Excellent clamping capability - Typical IR less than 1μA above 10V - Halogen-free according to IEC 61249-2-21 definition - Fast response time: Typically les

Surface Mount Transient Voltage Suppressor

Features • For surface mounted applications in order to optimize board space • Glass passivated junction • Built-in strain relief • Excellent clamping capability • Low profile package • Low inductance • Excellent clamping capability • Fast response time: typically less than 1.0 ps from 0 v

Surface Mount Transient Voltage Suppressor

Features • For surface mounted applications in order to optimize board space • Glass passivated junction • Built-in strain relief • Excellent clamping capability • Low profile package • Low inductance • Excellent clamping capability • Fast response time: typically less than 1.0 ps from 0 v

Transient Voltage Suppressor Diodes

■ Features ● PPP 600W ● VBR 5.0V-440V ■ Applications ● Clamping Voltage

丝印代码：100A；Transient Voltage Suppressors

Glass Passivated Junction Transient Voltage Suppressor VOLTAGE-6.8 TO 550 Volts 400 Watt Peak Pulse Power Features • For surface mounted applications in order to optimize board space • Glass passivated junction • Built-in strain relief • Excellent clamping capability • Lo

Excellent clamping capability

Features ● Peak power dissipation 600W @10 x 1000 us Pulse ● Low profile package. ● Excellent clamping capability. ● Glass passivated junction. ● Fast response time: typically less than 1ps from 0 Volts to BV min ● Typical IR less than 1uA when VBR min above 12V. ● IEC 61000-4-2 ESD

丝印代码：100A；Transient Voltage Suppressors

Features • For surface mounted applications in order to optimize board space • Glass passivated junction • Built-in strain relief • Excellent clamping capability • Low profile package • Low inductance • Excellent clamping capability • Fast response time: typically less than 1.0 ps from 0 v

丝印代码：100A；Transient Voltage Suppressors (TVS) Data Sheet

eatures For surface mounted applications in order to optimize board space Low profile package Built in strain relief Gla ss p assivated j unction Low inductance Excellent clamping capability 600W peak pulse power capability at 10/1000 μ s waveform, r epetition r ate (duty cycle): 0.01%

600W Surface Mount Transient Voltage Suppressor

600W Surface Mount Transient Voltage Suppressor Features ● Breakdown voltage from 6.8 to 250 volts ● Low inductance, excellent clamping capability ● Repetition rate(duty cycle): 0.01 ● Fast response time: typically less than 1.0ps from 0v to VBR ● For unidirectional types ● Typical IR less

600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Glass Passivated Die Construction 600W Peak Pulse Power Dissipation 5.8V – 513V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Voltage Typical Response Time

TRANSIENT VOLTAGE SUPPRESSOR

Features · Glass Passivated Die Construction · 600W Peak Pulse Power Dissipation · 5.8V – 513V Standoff Voltage · Uni and Bi-Directional Versions Available · Excellent Clamping Voltage · Typical Response Time

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

FEATURES ● Glass Passivated Die Construction ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Plastic Case Material has UL Flammability Classification Rating 94V-O ● Typical IR less than 1μA above 10V ● Fast Response Time : typically less than 1.0ns from 0v to V

Transient Voltage Suppressors

FEATURES ◇ For surface mounted applications in order to optimize board space. ◇ Low profile package. ◇ Built-in strain relief. ◇ Glass passivated junction. ◇ Low inductance. ◇ Excellent clamping capability. ◇ Repetition Rate (duty cycle): 0.01. ◇ Fast response time: typically less than 1.0

Low profile package

FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 600 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features ◆ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ◆ Low profile package with built-in strain relief for surface mounted applications ◆ Glass passivated junction ◆ Low incremental surge resistance ◆ 600W peak pulse power capability with a 10/1000us wavefo

6.8-550 Volts Peak pulse power: 600 Watts

Description The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. APPLICATIONS TVS devices are ideal for the protection of I/O Interfaces, bus and other vulnerable circuits used in

Surface Mount Transient Voltage Suppressors (TVS)

Description The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ✦ For surface mounted applications in order to optimize board space ✦ Low leakage ✦ Uni and Bidirectional u

丝印代码：100A；6.8 To 600V 600W Surface Mount Transient Voltage Suppressors (TVS)

Features For surface mounted applications in order to optimize board space Low leakage Uni and Bidirectional unit Glass passivated junction Low inductance Excellent clamping capability Typical IR less than 5μA above 10V 600W Peak power capability at 10 × 1000μs waveform Repetition rate (d

Surface Mount Transient Voltage Suppressors (TVS)

Description The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events Features ✦ For surface mounted applications in order to optimize board space ✦ Low leakage ✦ Uni and Bidirectional un

Transient Voltage Suppressors

Features 1. Halogen-free 2. Rohs compliant 3. Typical maximum temperature coefficient 4. ΔVBR = 0.1 x VBR@25°C x ΔT 5. Glass passivated Chip junction in DO-214AA package 6. 600W peak pulse capadility at 10×1000μs waveform, repetition rate(duty cycles):0.01 7. Fast response time:typically le

丝印代码：MXJ；Surface Mount Transient Voltage Suppressor

FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Built-in strain relief - Excellent clamping capability - Typical IR less than 1μA above 10V - Halogen-free according to IEC 61249-2-21 definition - Fast response time: Typically les

ZENER OVERVOLTAGE TRANSIENT SUPPRESSORS

Zener Overvoltage Transient Suppressors The P6SMB6.8 series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener impedance and fast response time. The P6SMB6.8 series is supplied in

Surface Mount Transient Voltage Suppressors

Features ‹Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ‹Low profile package with built-in strain relief for surface mounted applications ‹Glass passivated junction ‹Low incremental surge resistance ‹600W peak pulse power capability with a 10/1

Transient Voltage Suppression Diodes

Description The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Applications TVS devices are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circ

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

FEATURES • For surface mounted applications in order to optimize board space • Glass passivated junction • Built-in strain relief • Excellent clamping capability • Low profile package • Low inductance • Excellent clamping capability • Fast response time: typically less than

丝印代码：NF；SURFACE MOUNT TRANSIENT VOLTAGE SUPPESSOR DIODE

Features ● Glass Passivated Die Construction ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Material: UL Flammability Classification Rating 94V-0

Surface Mount Transient Voltage Suppressors

Features • Low profile package with built-in strain relief for surface mounted applications • Plastic package has UL flammability classification 94V-0 • Very-fast response time • Excellent clamping capability • Low incremental surge resistance • Glass passivated junction • High temperature

600W Surface Mount Transient Voltage Suppressors

600W Surface Mount Transient Voltage Suppressors Feature: * 600 Watt Peak Power Dissipation * Glass Passivated Die Construction * Excellent Clamping CapabilityFast Response Time * Plastic Material Has UL Flammability Classification Rating 94V-O Mechanical Data * Case:

Surface-Mount TRANSZORB® Transient Voltage Suppressors

FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in unidirectional and bidirectional • 600 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fa

Transient Voltage Suppressors (TVS)

Features ■ For surface mounted applications in order to optimize board space ■ Low profile package ■ Built-in strain relief ■ Glass passivated junction ■ Low inductance ■ Excellent clamping capability ■ 600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.

TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY

Features ■ For surface mounted applications in order to optimize board space ■ Low profile package ■ Built-in strain relief ■ Glass passivated junction ■ Low inductance ■ Excellent clamping capability ■ 600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0

RoHS compliant & Halogen free

Features ■ For surface mounted applications in order to optimize board space ■ Low profile package ■ Built-in strain relief ■ Glass passivated junction ■ Low inductance ■ Excellent clamping capability ■ 600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.

TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY

Features ■ For surface mounted applications in order to optimize board space ■ Low profile package ■ Built-in strain relief ■ Glass passivated junction ■ Low inductance ■ Excellent clamping capability ■ 600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0

UNI-DIRECTIONAL GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR 600 WATTS, 6.8 THRU 200 VOLTS

DESCRIPTION The CENTRAL SEMICONDUCTOR P6SMB6.8A Series types are Surface Mount Uni-Directional Glass Passivated Junction Transient Voltage Suppressors designed to protect voltage sensitive components from high voltage transients. THIS DEVICE IS MANUFACTURED WITH A GLASS PASSIVATED CHIP FOR OPTI

Surface Mount TRANSZORB® Transient Voltage Suppressors

FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 600 W peak pulse power capability with a    10/1000 μs waveform, repetitive rate (duty    cycle): 0.01 • Excellent clamping capability • Ver

Surface Mount TRANSZORB® Transient Voltage Suppressors

Surface Mount TRANSZORB® Transient Voltage Suppressors FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 600 W peak pulse power capability with a 10/1000 µs waveform, repetitive ra

Surface Mount TRANSZORB Transient Voltage Suppressors

Surface Mount TRANSZORB® Transient Voltage Suppressors FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 600 W peak pulse power capability with a 10/1000 µs waveform, repetitive ra

Surface Mount TRANSZORB Transient Voltage Suppressors

Surface Mount TRANSZORB® Transient Voltage Suppressors FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 600 W peak pulse power capability with a 10/1000 µs waveform, repetitive ra

Surface Mount TRANSZORB Transient Voltage Suppressors

Surface Mount TRANSZORB® Transient Voltage Suppressors FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 600 W peak pulse power capability with a 10/1000 µs waveform, repetitive ra

Surface Mount TRANSZORB® Transient Voltage Suppressors

FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 600 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very