Transient Voltage Suppressors (TVS)

Features ■ Glass passivated junction ■ Low zener impedance ■ Excellent clamping capability ■ 600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% ■ Fast response time ■ Typical IR less than 1μA above 12V. ■ High Temperature soldering guaranteed: 2

Transient Voltage Suppression Diodes

Description The P6KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Applications TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuit

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE - 6.8 TO 550 Volts 600 Watt Peak Power 5.0 Watt Steady State FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94 V-O • Glass passivated chip junction in DO-15 (DO-204AC) package • 600W surge capability at 10/1000 µs • Low zenen impedance • E

TRANSIENT VOLTAGE SUPPRESSOR

FEATURES Available in uni-directional & bi-directional 600W surge capability at 10x100 s waveform, duty cycle: 0.01 High temperature soldering capability 250 / 10 seconds/.375”(9.5mm) lead length/5lbs.,(2.3kg) tension Glass passivated chip junction Low zener impedance Fast response time:

Transient Voltage Suppression Diodes

The P6KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Description Features • 600W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% • Glass pa

Glass passivated junction

Features ● Peak power dissipation 600W @10 x 1000 us Pulse ● Low profile package. ● Excellent clamping capability. ● Glass passivated junction. ● Fast response time: typically less than 1ps from 0 Volts to BV min ● Typical IR less than 1uA when VBR min above 12V. ● IEC 61000-4

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 6.8 to 600 Volts

VOLTAGE - 6.8 to 600 Volts 600 Watt Peak Power / 5.0 Watt Steady State FEATURES ◎ Plastic package ◎ Glass passivated chip junction in DO-15 Package ◎ 600W surge capability at 10/1000 µs wave form ◎ Excellent clamping capability ◎ Low zener impedance ◎ Fast response time:

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Typical IR less than 1µA above 10V • 600W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time: typically less than 1.0 ps from 0 volts to BV min • Pb fre

Transient Voltage Suppressors

FEATURES ◇ Plastic package. ◇ Glass passivated chip junction in DO-15 package. ◇ 600W peak pulse power capability on 10/1000μs waveform. ◇ Excellent clamping capability. ◇ Low zener impedance. ◇ Fast response time: typically less than 1.0ps from 0 volt to BV min. ◇ Typical IR

TRANSIENT VOLTAGE SUPPRESSOR

Glass Passivated Die Construction 600W Peak Pulse Power Dissipation 5.8V- 459V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Case Material has UL Flammability Classification Rating 94V-O This is a Pb − Free Device All

封装/外壳：DO-204AC，DO-15，轴向 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：TVS DIODE 460VWM 740VC DO204AC 电路保护 TVS - 二极管

Transient Voltage Suppressor

文件：1.03142 Mbytes Page：4 Pages

常规瞬态电压抑制二极管

大功率TVS

600W Transient Voltage Suppressors

文件：360.94 Kbytes Page：5 Pages

P6KE Transient Voltage Suppressor Diode Series

文件：854.64 Kbytes Page：5 Pages

Unidirectional and Bidirectional Transient Voltage Suppressors

文件：490.07 Kbytes Page：4 Pages

Transient Voltage Suppressor Diodes

■ Features ● PPP 600W ● VBR 6.8V-540V ■ Applications ● Clamping Voltage

600 Watts Transient Voltage Suppressor Diodes

Features ◇ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ◇ 600W surge capability at 10 x 1000 us waveform ◇ Excellent clamping capability ◇ Low Dynamic impedance ◇ Fast response time: Typically less than 1.0ps from 0 volts to VBR for unidirectional and 5.0 ns f

TRANSZORB® Transient Voltage Suppressors

FEATURES • Glass passivated chip junction • Available in uni-directional and bi-directional • 600 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Sold

600WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.8 TO 540 VOLTS

文件：208.27 Kbytes Page：5 Pages

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

文件：1.3496 Mbytes Page：4 Pages

Transient Voltage Suppressors (TVS)

Features ■ Glass passivated junction ■ Low zener impedance ■ Excellent clamping capability ■ 600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% ■ Fast response time ■ Typical IR less than 1μA above 12V. ■ High Temperature soldering guaranteed: 2

Transient Voltage Suppression Diodes

Description The P6KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Applications TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuit

瞬态抑制二极管 (车用)

600W TRANSIENT VOLTAGE SUPPRESSOR

文件：129.509 Kbytes Page：4 Pages

封装/外壳：DO-204AC，DO-15，轴向 包装：卷带（TR）剪切带（CT） 描述：TVS DIODE 459VWM 740VC DO15 电路保护 TVS - 二极管