Overview

The STK672-540 is a hybrid IC for use as a unipolar, 2-phase stepping motor driver with PWM current control.

Features

• The motor speed can be controlled by the frequency of an external clock signal.

• 2-phase excitation or 1-2 phase excitation is selected according to

switching the state of the MODE pin (low or high).

• The phase is maintained even if the excitation mode is switched in the middle of operation.

• The direction of rotation can be changed by applying a high or low signal to

the CWB pin used to select the direction of rotation.

• Supports schmitt input for 2.5V high level input.

• Incorporating a current detection resistor (0.11Ω: resistor tolerance ±2),

motor current can be set using two external resistors.

• Equipped with an ENABLE pin that, during clock input, allows motor output to be

cut-off and resumed later while maintaining the same excitation timing.

Applications

• Office photocopiers, printers, etc.