• 808 x 608 Active Pixels, 1/3.6” Optical Format

• 4.8 m x 4.8 m Low Noise Global Shutter Pixels with

In-pixel CDS

• Monochrome (SN, SP), Color (SE, SF)

• Wide CRA Options (SP, SF)

• Frame Rate up to 120 fps at Full Resolution

• On−chip 10−bit Analog−to−Digital Converter (ADC)

• 10−bit Output Mode

• One Low Voltage Differential Signaling (LVDS)

High Speed Serial Output or Parallel CMOS Output

• Random Programmable Region of Interest (ROI)

Readout

• Serial Peripheral Interface (SPI)

• Automatic Exposure Control (AEC)

• Phase Locked Loop (PLL)

• Dual Power Supply (3.3 V and 1.8 V)

• −40°C to +85°C Operational Temperature Range

• 67 pin CSP

• 265 mW / 226 mW Power Dissipation (LVDS 120 fps /

60 fps)

• These Devices are Pb−Free and are RoHS Compliant

APPLICATIONS

• Machine Vision

• Motion Monitoring

• Security

• Bar Code Scanning

DESCRIPTION

The PYTHON 480 image sensor utilizes high sensitivity

4.8 m x 4.8 m pixels that support low noise “pipelined”

and “triggered” global shutter readout modes. In global

shutter mode, the sensors support correlated double

sampling (CDS) readout, reducing noise and increasing

dynamic range.

The image sensors have on−chip programmable gain

amplifiers and 10−bit A/D converters. The integration time

and gain parameters can be reconfigured without any visible

image artifact. Optionally the on−chip automatic exposure

control loop (AEC) controls these parameters dynamically.

The image’s black level is either calibrated automatically or

can be adjusted by a user programmable offset.

A high level of programmability using a four wire serial

peripheral interface enables the user to read out specific

regions of interest. Up to four regions can be programmed,

achieving even higher frame rates.

The image data interface consists of one LVDS data lane,

facilitating frame rate up to 120 frames per second.

A separate synchronization channel containing payload

information is provided to facilitate the image

reconstruction at the receiving end. The device also provides

a parallel CMOS output interface at the same frame rate.

The PYTHON 480 is packaged in a 67−pin CSP package

and is available in monochrome and Bayer color

configurations with standard and wide CRA options.