LED and Photosensor Pair

Description: Each LED/Photosensor pair in the series consists of a gallium arsenide infrared emiƫng diode and a NPN silicon phototransistor, mounted in a T-1 package (OPS665, OPS666, OPS667) or in a matched lateral side-looking plasƟc package (OPS690, OPS691, OPS692, OPS693 and OPS695, OPS696, OP

LED and photosensor pair

•High current transfer ratio\n• Low-cost plastic package\n• Lateral side-looking clear plastic package (OPS691, OPS692, OPS693 and OPS698);

LED and Photosensor Pairs

文件：1.19757 Mbytes Page：8 Pages

封装/外壳：T-1 包装：散装 描述：SENSOR OPT SLOT PHOTOTRANS T-1 传感器，变送器 光学传感器 - 光电遮断器 - 槽型 - 晶体管输出

8V CMOS Switched-Capacitor Voltage Converter

General Description The MAX665 charge-pump voltage inverter converts a +1.5V to +8V input to a corresponding -1.5V to -8V output. Using only two low-cost capacitors to produce 100mA, the MAX665 replaces switching regulators, eliminating inductors and their associated cost, size, and EMI.

8V CMOS Switched-Capacitor Voltage Converter

General Description The MAX665 charge-pump voltage inverter converts a +1.5V to +8V input to a corresponding -1.5V to -8V output. Using only two low-cost capacitors to produce 100mA, the MAX665 replaces switching regulators, eliminating inductors and their associated cost, size, and EMI.

8V CMOS Switched-Capacitor Voltage Converter

General Description The MAX665 charge-pump voltage inverter converts a +1.5V to +8V input to a corresponding -1.5V to -8V output. Using only two low-cost capacitors to produce 100mA, the MAX665 replaces switching regulators, eliminating inductors and their associated cost, size, and EMI.

丝印代码：-9F；Low-voltage avalanche regulator diodes

DESCRIPTION High performance voltage regulator diodes in small SOT23 plastic SMD packages. The series consists of PLVA650A to PLVA668A. FEATURES • Very low dynamic impedance at low currents: approximately 1⁄20 of conventional series • Hard breakdown knee • Low noise: approximat

RADIO AND CASSETTE RECORDER CIRCUIT

DESCRIPTION The UTC LAG665F is a monolithic integrated circuit, designed for portable radio cassette. FEATURES * 1-Chip stereo tape recorder with motor speed controller. * Operating supply voltage range: Vcc=2~5V * Good volume control