Dual Channel Encoder

Description The OPB950 consists of an infrared emitting diode and a monolithic integrated circuit which incorporates two independent photodiodes, linear amplifiers, Schmitt trigger circuits and output transistors. The outputs are TTL/LSTTL compatible and can drive 8 TTL loads. Applications inclu

Photologic dual channel encoder

•Dual channel outputs for Quadrature Output\n• Open collector inverter outputs\n• 0.010” (0.254 mm) sensor apertures for high resolution\n• Snap mount\n• OPB950 5±.0.5 Volt Vcc, OPB951 4.75 to 16 Volt Vcc;

封装/外壳：PCB 安装 包装：散装 描述：SENSOR OPTICAL 5.1MM PCB MOUNT 传感器，变送器 光学传感器 - 光电遮断器 - 槽型 - 逻辑输出

Dual Channel Encoder

Description: Each OPB950, series devices consists of an infrared Light Emitting Diode (LED) and a monolithic integrated circuit which incorporates two independent photodiodes, linear amplifiers, Schmitt trigger circuits and output transistors. The device is offered in two versions (see page 2 for

封装/外壳：PCB 安装 包装：散装 描述：SENSOR OPTICAL 5.1MM PCB MOUNT 传感器，变送器 光学传感器 - 光电遮断器 - 槽型 - 逻辑输出

Slotted Switch, Dual Channel

PNP Silicon AF Power Transistor (For AF drivers and output stages High collector current High current gain)

PNP Silicon AF Power Transistor • For AF drivers and output stages • High collector current • High current gain • Low collector-emitter saturation voltage • Complementary type: BDP947, BDP949 (NPN)

UHF push-pull power transistor

DESCRIPTION Two NPN silicon planar epitaxial transistors in push-pull configuration, intended for linear common emitter class-AB operation. The transistors are encapsulated in a 4-lead SOT262A2 flange package with 2 ceramic caps. The flange provides the common emitter connection for both transist

16-Bit Fixed Point Digital Signal Processor DSP Core

Introduction The D950-Core is a general purpose programmable 16-bit fixed point Digital Signal Processor Core, designed for multimedia, telecom and datacom applications. The D950-Core is a core product, used in combination with standard or custom peripherals from the standard cell library. The pe

LOW VOLTAGE PLL CLOCK DRIVER

Low Voltage PLL Clock Driver The MPC950/951 are 3.3V compatible, PLL based clock driver devices targeted for high performance clock tree designs. With output frequencies of up to 180MHz and output skews of 375ps the MPC950 is ideal for the most demanding clock tree designs. The devices employ a f

Integrated Circuit Positive 3 Terminal Voltage Regulator, 100mA

Description: The NTE950, NTE951, and NTE977 are positive 3–terminal voltage regulators in available in a TO92 type package. With adequate heat sinking these regulators can deliver 100mA output current. Current limiting is included to limit peak output current to safe value. Safe area protection