Slotted Optical Switch

Description: OPB804 contains an IRLED and phototransistor paired in an opaque plastic housing . The housing is an opaque grade of injection molded plastic, which minimizes the assembly’s sensitivity to visible and near-infrared radiation. A wide open aperture [0.060” (1.524mm) equivalent] makes

Slotted Optical Switch

Description: OPB804 is a non-contact optical switch with a NPN silicon phototransistor and infrared Light Emitting Diode (LED) which are mounted on opposite sides of a 0.155” ( 3.94 mm) wide slot. The device body is a single molded piece opaque plastic that reduces ambient light interference. A

Slotted optical switch

•Non-contact switch\n• PCB mount\n• Wide aperture\n• Opaque body to minimize sensitivity to ambient light;

封装/外壳：开槽模块 包装：卷带（TR） 描述：SWITCH IR PHOTO TRANS OUT 传感器，变送器 光学传感器 - 环境光，IR 红外线，UV 紫外线传感器

封装/外壳：PCB 安装 包装：散装 描述：SENSOR OPT SLOT PHOTOTRAN PCB MT 传感器，变送器 光学传感器 - 光电遮断器 - 槽型 - 晶体管输出

SINGLE-PHASE SILICON BRIDGE(VOLTAGE - 50 to 800 Volts CURRENT - P.C. MTG 3A, HEAT-SINK MTG 8A)

VOLTAGE - 50 to 800 Volts CURRENT - P.C. MTG 3A, HEAT-SINK MTG 8A FEATURES • Surge overload rating—200 Amperes peak • Low forward voltage drop and reverse leakage • Small size, simple installation • Plastic package has Underwriter Laboratory Flammability Classification 94V-O

DPAK SURFACE MOUNT SUPER FAST RECOVERY RECTIFIER(VOLTAGE - 200 to 600 Volts CURRENT - 8.0 Amperes)

VOLTAGE - 200 to 600 Volts CURRENT - 8.0 Amperes FEATURES • For surface mounted applications • Low profile package • Built-in strain relief • Easy pick and place • Superfast recovery times for high efficiency • Plastic package has Underwriters Laboratory Flammability Classification 94V-O •

Silicon MOS IC

■ Features ● Allowing downsizing of the sets through the reduction of a parts count resulting from the voltage step-up utilizing a coil instead of a transformer and employing the thin surface mounting package. ● Allowing low voltage drive (adaptable to a small and low-voltage battery), or VC

NPN SILICON EPITAXIAL TRANSISTOR WITH BUILT-IN 2 x 2SC5004 FLAT-LEAD 6-PIN THIN-TYPE ULTRA SUPER MINIMOLD

DESCRIPTION The µPA804TC has built-in two transistors which were developed for UHF. FEATURES • High fT: fT= 5.0 GHz TYP. (@ VCE= 5 V, IC= 5 mA, f = 1 GHz) • Flat-lead 6-pin thin-type ultra super minimold package • Built-in 2 transistors (2 ×2SC5004)

NPN SILICON EPITAXIAL TRANSISTOR WITH BUILT-IN 2 x 2SC5004 FLAT-LEAD 6-PIN THIN-TYPE ULTRA SUPER MINIMOLD

DESCRIPTION The µPA804TC has built-in two transistors which were developed for UHF. FEATURES • High fT: fT= 5.0 GHz TYP. (@ VCE= 5 V, IC= 5 mA, f = 1 GHz) • Flat-lead 6-pin thin-type ultra super minimold package • Built-in 2 transistors (2 ×2SC5004)