Photologic slotted optical switch

•Non-contact switching\n• PCBoard mounting\n• Enhanced signal to noise ratio\n• Choice of four logical output options;

Photologic® Slotted Optical Switch

Features: • Non-contact switching • PCBoard mounting • Enhanced signal to noise ratio • Choice of four Logical output options Description: Each OPB615, OPB625 and OPB665 series slotted optical switch consists of an 890 nm, infrared Light Emitting Diode (LED) and a monolithic integrated circu

PHOTOLOGIC-R SLOTTED OPTICAL SWITCH

Description The OPB665 series optical switches consist of a monolithic integrated circuit and an infrared emitting diode mounted on opposite sides of a 0.125 (3.18 mm) wide slot. Features • Four Output Options • 0.125 (3.18 mm) Wide Gap • 0.320 (8.13 mm) Lead Spacing • N or T Package • 0.01

Photologic Slotted Optical Switch

Description Each OPB615, OPB625 and OPB665 series slotted optical switch consists of an 890 nm, infrared Light Emitting Diode(LED) and a monolithic integrated circuit that incorporates a photodiode, a linear amplifier and a Schmitt trigger on a single silicon chip. OPB665 offers two mounting opti

Photologic Slotted Optical Switch

Description Each OPB615, OPB625 and OPB665 series slotted optical switch consists of an 890 nm, infrared Light Emitting Diode(LED) and a monolithic integrated circuit that incorporates a photodiode, a linear amplifier and a Schmitt trigger on a single silicon chip. OPB665 offers two mounting opti

PHOTOLOGIC-R SLOTTED OPTICAL SWITCH

Description The OPB665 series optical switches consist of a monolithic integrated circuit and an infrared emitting diode mounted on opposite sides of a 0.125 (3.18 mm) wide slot. Features • Four Output Options • 0.125 (3.18 mm) Wide Gap • 0.320 (8.13 mm) Lead Spacing • N or T Package • 0.01

Photologic® Slotted Optical Switch

Features: • Non-contact switching • PCBoard mounting • Enhanced signal to noise ratio • Choice of four Logical output options Description: Each OPB615, OPB625 and OPB665 series slotted optical switch consists of an 890 nm, infrared Light Emitting Diode (LED) and a monolithic integrated circu

Slotted Switch, N Package

封装/外壳：PCB 安装 包装：散装 描述：SENSOR OPTICAL 3.18MM PCB MOUNT 传感器，变送器 光学传感器 - 光电遮断器 - 槽型 - 逻辑输出

封装/外壳：PCB 安装 包装：散装 描述：SENSOR OPTICAL 3.18MM PCB MOUNT 传感器，变送器 光学传感器 - 光电遮断器 - 槽型 - 逻辑输出

8V CMOS Switched-Capacitor Voltage Converter

General Description The MAX665 charge-pump voltage inverter converts a +1.5V to +8V input to a corresponding -1.5V to -8V output. Using only two low-cost capacitors to produce 100mA, the MAX665 replaces switching regulators, eliminating inductors and their associated cost, size, and EMI.

8V CMOS Switched-Capacitor Voltage Converter

General Description The MAX665 charge-pump voltage inverter converts a +1.5V to +8V input to a corresponding -1.5V to -8V output. Using only two low-cost capacitors to produce 100mA, the MAX665 replaces switching regulators, eliminating inductors and their associated cost, size, and EMI.

8V CMOS Switched-Capacitor Voltage Converter

General Description The MAX665 charge-pump voltage inverter converts a +1.5V to +8V input to a corresponding -1.5V to -8V output. Using only two low-cost capacitors to produce 100mA, the MAX665 replaces switching regulators, eliminating inductors and their associated cost, size, and EMI.

丝印代码：-9F；Low-voltage avalanche regulator diodes

DESCRIPTION High performance voltage regulator diodes in small SOT23 plastic SMD packages. The series consists of PLVA650A to PLVA668A. FEATURES • Very low dynamic impedance at low currents: approximately 1⁄20 of conventional series • Hard breakdown knee • Low noise: approximat

RADIO AND CASSETTE RECORDER CIRCUIT

DESCRIPTION The UTC LAG665F is a monolithic integrated circuit, designed for portable radio cassette. FEATURES * 1-Chip stereo tape recorder with motor speed controller. * Operating supply voltage range: Vcc=2~5V * Good volume control