PHOTOLOGIC SLOTTED OPTICAL SWITICH

Description The OPB625 series slotted optical switch consists of an infrared emitting diode and a monolithic integrated circuit which incorporates a photodiode, a linear amplifier and a Schmitt trigger on a single silicon chip. Features: ● Non-contact switching ● Printed circuit board mounting

Photologic Slotted Optical Switch

Description Each OPB615, OPB625 and OPB665 series slotted optical switch consists of an 890 nm, infrared Light Emitting Diode(LED) and a monolithic integrated circuit that incorporates a photodiode, a linear amplifier and a Schmitt trigger on a single silicon chip. OPB665 offers two mounting opti

Photologic® Slotted Optical Switch

Features: • Non-contact switching • PCBoard mounting • Enhanced signal to noise ratio • Choice of four Logical output options Description: Each OPB615, OPB625 and OPB665 series slotted optical switch consists of an 890 nm, infrared Light Emitting Diode (LED) and a monolithic integrated circu

Slotted Switch, N Package

•Non-contact switching\n• PCBoard mounting\n• Enhanced signal to noise ratio\n• Choice of four logical output options;

封装/外壳：PCB 安装 包装：散装 描述：SENSOR OPTICAL 4.83MM PCB MOUNT 传感器，变送器 光学传感器 - 光电遮断器 - 槽型 - 逻辑输出

Silicon Rectifier Fast Recovery

Description: The NTE625 and NTE626 are fast recovery silicon rectifiers in a 2–Lead TO220 type package designed for special applications such as DC power supplies, inverters, converters, ultrasonic systems, choppers and low RF interference. Features: Low Forward Voltage High Current

Rectifier diodes Schottky barrier

GENERAL DESCRIPTION Dual schottky rectifier diodes intended for use as output rectifiers in low voltage, high frequency switched mode power supplies. The PBYR625CTD series is supplied in the SOT428 surface mounting package. FEATURES • Low forward volt drop • Fast switching • Reverse surge ca

High performance low power mixer FM IF system with high-speed RSSI

DESCRIPTION The SA625 is pin-to-pin compatible with the SA605, but has faster RSSI rise and fall times. The SA625 is a high performance monolithic low-power FM IF system incorporating a mixer/oscillator, two limiting intermediate frequency amplifiers, quadrature detector, muting, logarithmic re

High performance low power mixer FM IF system with high-speed RSSI

DESCRIPTION The SA625 is pin-to-pin compatible with the SA605, but has faster RSSI rise and fall times. The SA625 is a high performance monolithic low-power FM IF system incorporating a mixer/oscillator, two limiting intermediate frequency amplifiers, quadrature detector, muting, logarithmic re

Phase Control SCR (300-400 Amperes 1200 Volts)

文件：717.96 Kbytes Page：4 Pages