High Speed, Current-Feedback, High Voltage OPERATIONAL AMPLIFIER

DESCRIPTION\nThe OPA603 is a high-speed current-feedback op amp with guaranteed specifications at both ±5V and ±15V power supplies. It can deliver full ±10V signals into 150Ω loads with up to 1000V/µs slew rate. This allows it to drive terminated 75Ωcables. With 150mA peak output current capability ●WIDE SUPPLY RANGE: ±4.5 to ±18V\n●BANDWIDTH: 100MHz, G = 1 to 10\n●SLEW RATE: 1000V/µs\n●FAST SETTLING TIME: 50ns to 0.1%\n●HIGH OUTPUT CURRENT: ±150mA peak\n●HIGH OUTPUT VOLTAGE: ±12V;

High Speed, Current-Feedback, High Voltage OPERATIONAL AMPLIFIER

文件：262.58 Kbytes Page：12 Pages

High Speed, Current-Feedback, High Voltage OPERATIONAL AMPLIFIER

文件：194.85 Kbytes Page：13 Pages

High Speed, Current-Feedback, High Voltage OPERATIONAL AMPLIFIER

文件：262.58 Kbytes Page：12 Pages

High Speed, Current-Feedback, High Voltage OPERATIONAL AMPLIFIER

文件：262.58 Kbytes Page：12 Pages

High Speed, Current-Feedback, High Voltage OPERATIONAL AMPLIFIER

文件：194.85 Kbytes Page：13 Pages

High Speed, Current-Feedback, High Voltage OPERATIONAL AMPLIFIER

文件：194.85 Kbytes Page：13 Pages

PHASE CONTROL THYRISTOR

PHASE CONTROL THYRISTOR Repetitive voltage up to 1600 V Mean on-state current 720 A Surge current 8.8 kA

DPAK SURFACE MOUNT SUPER FAST RECOVERY RECTIFIER(VOLTAGE - 200 to 600 Volts CURRENT - 6.0 Amperes)

VOLTAGE 200 to 600 Volts CURRENT 6.0 Amperes FEATURES • Superfast recovery times-epitaxial construction. • Low forward voltage, high current capability. • Exceeds environmental standards of MIL-S-19500/228. • Hermetically sealed. • Low leakage. • High surge capability. • Plastic package ha

SUPER FAST RECOVERY RECTIFIER(VOLTAGE - 200 to 600 Volts CURRENT - 6.0 Amperes)

SUPER FAST RECOVERY RECTIFIER VOLTAGE - 200 to 600 Volts CURRENT - 6.0 Amperes FEATURES • For thorough hole applications • Low profile package • Built-in strain relief • Easy pick and place • Superfast recovery times for high efficiency • Plastic package has Underwriters

TrenchMOS/ Schottky diode array Three phase brushless d.c. motor driver

GENERAL DESCRIPTION Six n-channel, enhancement mode, logic level, field-effect power transistors and six schottky diodes configured as three half-bridges. This device has low on-state resistance and fast switching. The intended application is in computer disk and tape drives as a three phase brus

P-CHANNEL MOS FET 6-PIN 2 CIRCUITS

P-CHANNEL MOS FET (6-PIN 2 CIRCUITS) The µPA603T is a mini-mold device provided with two MOS FET circuits. It achieves high-density mounting and saves mounting costs. FEATURES • Two MOS FET circuits in package the same size as SC-59 • Complement to µPA602T • Automatic mounting