具有关断状态的 1.8V、高 CMR、RRIO 运算放大器

The OPA363 and OPA364 families are high-performance, CMOS operational amplifiers optimized for very low voltage, single-supply operation. These miniature, low-cost amplifiers are designed to operate on single supplies from 1.8 V (±0.9 V) to 5.5 V (±2.75 V). Applications include sensor amplification • 1.8V 运行电压\n• 微型 封装\n• 带宽： 7MHz\n• CMRR：90dB（典型）\n• 压摆率：5V/µs\n• 低失调电压：500µV（最大值）\n• 静态电流：每个通道750µA（最大值）\n• 关断模式：每个通道小于 1µA;

96kHz 24Bit DAC with PLL

GENERAL DESCRIPTION The AK4363 is a stereo CMOS D/A Converter and Phase Locked Loop for use in digital video broadcast set-top box applications or DVD. The DAC signal outputs are single-ended and are analog filtered to remove out of band noise. Therefore no external filters are required. The PLL

96kHz 24Bit DAC with PLL

GENERAL DESCRIPTION The AK4363 is a stereo CMOS D/A Converter and Phase Locked Loop for use in digital video broadcast set-top box applications or DVD. The DAC signal outputs are single-ended and are analog filtered to remove out of band noise. Therefore no external filters are required. The PLL

96kHz 24Bit DAC with PLL

GENERAL DESCRIPTION The AK4363 is a stereo CMOS D/A Converter and Phase Locked Loop for use in digital video broadcast set-top box applications or DVD. The DAC signal outputs are single-ended and are analog filtered to remove out of band noise. Therefore no external filters are required. The PLL

EVALUATION BOARD REV.A FOR AK4363

GENERAL DESCRIPTION The AK4363 is a stereo CMOS D/A Converter and Phase Locked Loop for use in digital video broadcast set-top box applications or DVD. The DAC signal outputs are single-ended and are analog filtered to remove out of band noise. Therefore no external filters are required. The PLL

DC-2000 MHZ CASCADABLE SIGE HBT MMIC AMPLIFIER

Product Description Stanford Microdevices SGA-4363 is a high performance SiGe HBT MMIC Amplifier. A Darlington configuration featuring 1 micron emitters provides high FT and excellent thermal perfomance. The heterojunction increases breakdown voltage and minimizes leakage current between junction