Dual/Quad Low Power, High Speed JFET Operational Amplifiers

GENERAL DESCRIPTION The OP282/OP482 dual and quad operational amplifiers feature excellent speed at exceptionally low supply currents. The slew rate is typically 9 V/µs with a supply current of less than 250 µA per amplifier. These unity-gain stable amplifiers have a typical gain bandwidth of 4 M

Dual/Quad, Low Power, High Speed JFET Operational Amplifiers

GENERAL DESCRIPTION The OP282/OP482 dual and quad operational amplifiers feature excellent speed at exceptionally low supply currents. The slew rate is typically 9 V/µs with a supply current of less than 250 µA per amplifier. These unity-gain stable amplifiers have a typical gain bandwidth of 4 M

四通道、低功耗、高速JFET运算放大器

OP282/OP482分别为双通道和四通道运算放大器，具有出色的速度性能和极低的电源电流。压摆率超过7 V/µs，每个放大器的电源电流低于250 µA。这些放大器均为单位增益稳定型，典型增益带宽为4 MHz。OP-282/OP-482的JFET输入级可确保典型偏置电流仅为数pA，而且在整个温度范围内均小于500 pA。双通道放大器的失调电压低于3 mV，四通道放大器的失调电压低于4 mV。宽输出摆幅（各电源的1.5 V范围内）、低功耗和高压摆率，使得OP-282/OP-482非常适合电池供电系统或功率受限的应用。输入共模范围包括正电源电压，因此这些器件是高端信号调理应用的绝佳选择。OP-282 • 高压摆率：9 V/μs\n\n• 宽带宽：4 MHz\n\n• 低电源电流：每个放大器250 µA\n\n• 低失调电压：3 mV\n\n• 低偏置电流：100 pA\n\n• 快速建立时间\n\n• 共模范围包括V+\n\n• 单位增益稳定;

Dual/Quad Low Power, High Speed JFET Operational Amplifiers

文件：340.58 Kbytes Page：16 Pages

Dual/Quad, Low Power, High Speed JFET Operational Amplifiers

GENERAL DESCRIPTION The OP282/OP482 dual and quad operational amplifiers feature excellent speed at exceptionally low supply currents. The slew rate is typically 9 V/µs with a supply current of less than 250 µA per amplifier. These unity-gain stable amplifiers have a typical gain bandwidth of 4 M

Dual/Quad, Low Power, High Speed JFET Operational Amplifiers

GENERAL DESCRIPTION The OP282/OP482 dual and quad operational amplifiers feature excellent speed at exceptionally low supply currents. The slew rate is typically 9 V/µs with a supply current of less than 250 µA per amplifier. These unity-gain stable amplifiers have a typical gain bandwidth of 4 M

Dual/Quad Low Power, High Speed JFET Operational Amplifiers

GENERAL DESCRIPTION The OP282/OP482 dual and quad operational amplifiers feature excellent speed at exceptionally low supply currents. The slew rate is typically 9 V/µs with a supply current of less than 250 µA per amplifier. These unity-gain stable amplifiers have a typical gain bandwidth of 4 M

Dual/Quad, Low Power, High Speed JFET Operational Amplifiers

GENERAL DESCRIPTION The OP282/OP482 dual and quad operational amplifiers feature excellent speed at exceptionally low supply currents. The slew rate is typically 9 V/µs with a supply current of less than 250 µA per amplifier. These unity-gain stable amplifiers have a typical gain bandwidth of 4 M

Dual/Quad Low Power, High Speed JFET Operational Amplifiers

GENERAL DESCRIPTION The OP282/OP482 dual and quad operational amplifiers feature excellent speed at exceptionally low supply currents. The slew rate is typically 9 V/µs with a supply current of less than 250 µA per amplifier. These unity-gain stable amplifiers have a typical gain bandwidth of 4 M

Dual/Quad, Low Power, High Speed JFET Operational Amplifiers

GENERAL DESCRIPTION The OP282/OP482 dual and quad operational amplifiers feature excellent speed at exceptionally low supply currents. The slew rate is typically 9 V/µs with a supply current of less than 250 µA per amplifier. These unity-gain stable amplifiers have a typical gain bandwidth of 4 M

Dual/Quad, Low Power, High Speed JFET Operational Amplifiers

GENERAL DESCRIPTION The OP282/OP482 dual and quad operational amplifiers feature excellent speed at exceptionally low supply currents. The slew rate is typically 9 V/µs with a supply current of less than 250 µA per amplifier. These unity-gain stable amplifiers have a typical gain bandwidth of 4 M

Dual/Quad, Low Power, High Speed JFET Operational Amplifiers

GENERAL DESCRIPTION The OP282/OP482 dual and quad operational amplifiers feature excellent speed at exceptionally low supply currents. The slew rate is typically 9 V/µs with a supply current of less than 250 µA per amplifier. These unity-gain stable amplifiers have a typical gain bandwidth of 4 M

Dual/Quad, Low Power, High Speed JFET Operational Amplifiers

GENERAL DESCRIPTION The OP282/OP482 dual and quad operational amplifiers feature excellent speed at exceptionally low supply currents. The slew rate is typically 9 V/µs with a supply current of less than 250 µA per amplifier. These unity-gain stable amplifiers have a typical gain bandwidth of 4 M

Dual/Quad, Low Power, High Speed JFET Operational Amplifiers

GENERAL DESCRIPTION The OP282/OP482 dual and quad operational amplifiers feature excellent speed at exceptionally low supply currents. The slew rate is typically 9 V/µs with a supply current of less than 250 µA per amplifier. These unity-gain stable amplifiers have a typical gain bandwidth of 4 M

Dual/Quad, Low Power, High Speed JFET Operational Amplifiers

GENERAL DESCRIPTION The OP282/OP482 dual and quad operational amplifiers feature excellent speed at exceptionally low supply currents. The slew rate is typically 9 V/µs with a supply current of less than 250 µA per amplifier. These unity-gain stable amplifiers have a typical gain bandwidth of 4 M

Dual/Quad Low Power, High Speed JFET Operational Amplifiers

文件：340.58 Kbytes Page：16 Pages

Dual/Quad Low Power, High Speed JFET Operational Amplifiers

文件：340.58 Kbytes Page：16 Pages

Dual/Quad Low Power, High Speed JFET Operational Amplifiers

文件：340.58 Kbytes Page：16 Pages

Dual/Quad Low Power, High Speed JFET Operational Amplifiers

文件：340.58 Kbytes Page：16 Pages

Dual/Quad Low Power, High Speed JFET Operational Amplifiers

文件：340.58 Kbytes Page：16 Pages

Dual/Quad Low Power, High Speed JFET Operational Amplifiers

文件：340.58 Kbytes Page：16 Pages

Dual/Quad Low Power, High Speed JFET Operational Amplifiers

文件：340.58 Kbytes Page：16 Pages

Band-switching diodes

DESCRIPTION Planar high performance band-switching diode in a hermetically sealed glass SOD68 (DO-34) package. FEATURES • Continuous reverse voltage: max. 35 V • Continuous forward current: max. 100 mA • Low diode capacitance: max. 1.0 to 1.6 pF • Low diode forward resistance:

HALL.EFFECT PICKUP IGNITION CONTROLLER

DESCRIPTION The L482 is an integrated circuit designed for use with an NPN darlington in breakerless ignition systems with hall-effect pickup sensors and high energy ignition coils. It controls the energy stored in the ignition coil and the desaturation time of the external darlington to lim

100mW STEREO HEADPHONE AMPLIFIER

Description The TS482 is a dual audio power amplifier able to drive a 16 or 32Ω stereo headset down to low voltages. ■ Operating from Vcc=2V to 5.5V ■ 100mW into 16Ω at 5V ■ 38mW into 16Ω at 3.3V ■ 11.5mW into 16Ωat 2V ■ Switch ON/OFF click reduction circuitry ■ High power supply rejec

100mW STEREO HEADPHONE AMPLIFIER

Description The TS482 is a dual audio power amplifier able to drive a 16 or 32Ω stereo headset down to low voltages. ■ Operating from Vcc=2V to 5.5V ■ 100mW into 16Ω at 5V ■ 38mW into 16Ω at 3.3V ■ 11.5mW into 16Ωat 2V ■ Switch ON/OFF click reduction circuitry ■ High power supply rejec

Round.Top View Type

文件：32.36 Kbytes Page：1 Pages