15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

FEATURES Wide bandwidth: 15 MHz Low offset voltage: 325 μV max Low noise: 9.5 nV/√Hz @ 1 kHz Single-supply operation: 2.7 V to 12 V Rail-to-rail output swing Low TCVOS: 1 μV/°C typ High slew rate: 13 V/μs No phase inversion Unity-gain stable APPLICATIONS Portable instrumentation Sampli

Ultralow Noise Amplifier at Lower Power

FEATURES Ultralow noise: 2.8 nV/√Hz at 1 kHz typical Ultralow distortion: 0.0002% typical Low supply current: 1.8 mA per amplifier typical Offset voltage: 1 mV maximum Bandwidth: 6.5 MHz typical Slew rate: 12 V/μs typical Dual-supply operation: ±4.5 V to ±18 V Unity-gain stable Extended

15 MHZ轨到轨双通道运算放大器

OP162（单通道）、OP262（双通道）和OP462（四通道）轨到轨15 MHz放大器具有新设计所需的超快速特性，以及精度和低功耗优势。这些器件具有极低的失调电压（典型值为45 µV）和低噪声，非常适合精密滤波器和仪器仪表应用。同时电源电流较低，典型值仅500 µA，对于便携式或高密度集成设计都至关重要。此外，与标准视频放大器相比，轨到轨输出摆幅能够提供更大的动态范围和控制能力。\n\n这些器件采用低至2.7 V的单电源或最高±6 V的双电源供电，具有快速建立时间和宽输出摆幅，适合用作采样模数转换器的缓冲器。输出驱动电流为30 mA（吸电流和源电流），适合许多音频和显示应用的需要；在有限的时 • 宽带宽：15 MHz\n\n• 低失调电压：325 µV（最大值）\n\n• 低噪声：9.5 nV/√Hz (1 kHz)\n\n• 单电源供电：+2.7 V至+12 V\n\n• 轨到轨输出摆幅\n\n• 低TCVOS：1 µV/°C（典型值）\n\n• 高压摆率：13 V/µs\n\n• 欲了解更多特性，请参考数据手册\n\n\nOP262-EP支持防务和航空航天应用（AQEC标准）\n• 下载OP262-EP数据手册 (pdf)\n\n• 军用温度范围（−55°C至+125℃）\n\n• 受控制造基线\n\n• 唯一封装/测试厂\n\n• 唯一制造厂\n\n• 增强型产品变更通知\n;

Ultralow Noise Amplifier at Lower Power

文件：1.57654 Mbytes Page：24 Pages

MicroConverter짰 12-Bit ADCs and DACs with Embedded High Speed 62-kB Flash MCU

文件：908.68 Kbytes Page：88 Pages

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

FEATURES Wide bandwidth: 15 MHz Low offset voltage: 325 μV max Low noise: 9.5 nV/√Hz @ 1 kHz Single-supply operation: 2.7 V to 12 V Rail-to-rail output swing Low TCVOS: 1 μV/°C typ High slew rate: 13 V/μs No phase inversion Unity-gain stable APPLICATIONS Portable instrumentation Sampli

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

FEATURES Wide bandwidth: 15 MHz Low offset voltage: 325 μV max Low noise: 9.5 nV/√Hz @ 1 kHz Single-supply operation: 2.7 V to 12 V Rail-to-rail output swing Low TCVOS: 1 μV/°C typ High slew rate: 13 V/μs No phase inversion Unity-gain stable APPLICATIONS Portable instrumentation Sampli

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

FEATURES Wide bandwidth: 15 MHz Low offset voltage: 325 μV max Low noise: 9.5 nV/√Hz @ 1 kHz Single-supply operation: 2.7 V to 12 V Rail-to-rail output swing Low TCVOS: 1 μV/°C typ High slew rate: 13 V/μs No phase inversion Unity-gain stable APPLICATIONS Portable instrumentation Sampli

15 MHz Rail-to-Rail Operational Amplifiers

FEATURES Wide bandwidth: 15 MHz Low offset voltage: 325 μV max Low noise: 9.5 nV/√Hz @ 1 kHz Single-supply operation: 2.7 V to 12 V Rail-to-rail output swing Low TCVOS: 1 μV/°C typ High slew rate: 13 V/μs No phase inversion Unity-gain stable APPLICATIONS Portable instrumentation Sampli

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

FEATURES Wide bandwidth: 15 MHz Low offset voltage: 325 μV max Low noise: 9.5 nV/√Hz @ 1 kHz Single-supply operation: 2.7 V to 12 V Rail-to-rail output swing Low TCVOS: 1 μV/°C typ High slew rate: 13 V/μs No phase inversion Unity-gain stable APPLICATIONS Portable instrumentation Sampli

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

FEATURES Wide bandwidth: 15 MHz Low offset voltage: 325 μV max Low noise: 9.5 nV/√Hz @ 1 kHz Single-supply operation: 2.7 V to 12 V Rail-to-rail output swing Low TCVOS: 1 μV/°C typ High slew rate: 13 V/μs No phase inversion Unity-gain stable APPLICATIONS Portable instrumentation Sampli

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

FEATURES Wide bandwidth: 15 MHz Low offset voltage: 325 μV max Low noise: 9.5 nV/√Hz @ 1 kHz Single-supply operation: 2.7 V to 12 V Rail-to-rail output swing Low TCVOS: 1 μV/°C typ High slew rate: 13 V/μs No phase inversion Unity-gain stable APPLICATIONS Portable instrumentation Sampli

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

FEATURES Wide bandwidth: 15 MHz Low offset voltage: 325 μV max Low noise: 9.5 nV/√Hz @ 1 kHz Single-supply operation: 2.7 V to 12 V Rail-to-rail output swing Low TCVOS: 1 μV/°C typ High slew rate: 13 V/μs No phase inversion Unity-gain stable APPLICATIONS Portable instrumentation Sampli

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

FEATURES Wide bandwidth: 15 MHz Low offset voltage: 325 μV max Low noise: 9.5 nV/√Hz @ 1 kHz Single-supply operation: 2.7 V to 12 V Rail-to-rail output swing Low TCVOS: 1 μV/°C typ High slew rate: 13 V/μs No phase inversion Unity-gain stable APPLICATIONS Portable instrumentation Sampli

15 MHz Rail-to-Rail Operational Amplifiers

FEATURES Wide bandwidth: 15 MHz Low offset voltage: 325 μV max Low noise: 9.5 nV/√Hz @ 1 kHz Single-supply operation: 2.7 V to 12 V Rail-to-rail output swing Low TCVOS: 1 μV/°C typ High slew rate: 13 V/μs No phase inversion Unity-gain stable APPLICATIONS Portable instrumentation Sampli

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

文件：471.55 Kbytes Page：20 Pages

NPN video transistors

NPN video transistors DESCRIPTION NPN video transistor in a SOT32 (TO-126) plastic package. FEATURES • High breakdown voltages • Low output capacitance • Optimum temperature profile • Good thermal stability • Excellent reliability properties. APPLICATIONS • Buff

Military DC-DC Converters 50 to 100W

Military DC-DC Converters 50 to 100W Features Inputs: 28Vdc per MIL-STD-704D/E 155Vdc per MIL-STD-1399A 270Vdc per MIL-STD-704D/E Single output: 2 – 48Vdc Up to 23W/in3 MIL-STD-810 environments Up to 90 efficiency Remote sense Current limit OVP a

Military DC-DC Converters 50 to 100W

Military DC-DC Converters 50 to 100W Features Inputs: 28Vdc per MIL-STD-704D/E 155Vdc per MIL-STD-1399A 270Vdc per MIL-STD-704D/E Single output: 2 – 48Vdc Up to 23W/in3 MIL-STD-810 environments Up to 90 efficiency Remote sense Current limit OVP a

Military DC-DC Converters 50 to 100W

Military DC-DC Converters 50 to 100W Features Inputs: 28Vdc per MIL-STD-704D/E 155Vdc per MIL-STD-1399A 270Vdc per MIL-STD-704D/E Single output: 2 – 48Vdc Up to 23W/in3 MIL-STD-810 environments Up to 90 efficiency Remote sense Current limit OVP a

TRISILTM

DESCRIPTION The SMTPBxx series has been designedto protect telecommunication equipment against lightning and transient induced by AC power lines. FEATURES BIDIRECTIONAL CROWBAR PROTECTION. BREAKDOWNVOLTAGE RANGE: From 62 V To 270 V. HOLDING CURRENT: IH= 150 mA min REPETITIVE PE