5V Input, 3A Output Current 3.3V, 2.5V 1.8V, 1.5V Output Switching Regulator Three Terminal Package

[Omnirel] DESCRIPTION The OM955X series of Switching Regulators are designed for pin compatibility with standard 3- Pin linear regulators. They are well suited for on-board, non- isolated power applications where efficient point- of- load regulation is needed. The package is designed using Chip-

4-bit I2C LED driver with programmable blink rates

DESCRIPTION The PCA9553 LED Blinker blinks LEDs in I2C and SMBus applications where it is necessary to limit bus traffic or free up the I2C Master’s (MCU, MPU, DSP, chipset, etc.) timer. The uniqueness of this device is the internal oscillator with two programmable blink rates. To blink LEDs usin

4-bit I2C LED driver with programmable blink rates

DESCRIPTION The PCA9553 LED Blinker blinks LEDs in I2C and SMBus applications where it is necessary to limit bus traffic or free up the I2C Master’s (MCU, MPU, DSP, chipset, etc.) timer. The uniqueness of this device is the internal oscillator with two programmable blink rates. To blink LEDs usin

4-bit I2C LED driver with programmable blink rates

DESCRIPTION The PCA9553 LED Blinker blinks LEDs in I2C and SMBus applications where it is necessary to limit bus traffic or free up the I2C Master’s (MCU, MPU, DSP, chipset, etc.) timer. The uniqueness of this device is the internal oscillator with two programmable blink rates. To blink LEDs usin

12 ns TRIPLE-CHANNEL HIGH VOLTAGE VIDEO AMPLIFIER

DESCRIPTION The STV9553 is a triple-channel video amplifier designed in a 120V-high voltage technology and able to drive in DC-coupling mode the 3 cathodes of a CRT monitor. The STV9553 supports PICTURE BOOST applications where video amplitude up to 50V or above is required, ensuring a maxi

LSI for FM Multiplex Data Demodulation

文件：63.37 Kbytes Page：7 Pages