位置:TEA2017AAT2 > TEA2017AAT2详情

TEA2017AAT2中文资料

厂家型号

TEA2017AAT2

文件大小

608.01Kbytes

页面数量

66

功能描述

Digital configurable LLC and multimode PFC controller

数据手册

下载地址一下载地址二到原厂下载

生产厂商

恩XP

TEA2017AAT2数据手册规格书PDF详情

General description

The TEA2017AAT is a digital configurable LLC and PFC combo controller for highefficiency

resonant power supplies. It includes the LLC controller and PFC controller

functionality. The PFC can be configured to operate in DCM/QR, CCM fixed frequency,

or multimode which supports all operation modes to optimize the PFC efficiency. The

TEA2017AAT enables building a complete resonant power supply which is easy to

design and has a very low component count. The TEA2017AAT comes in a low profile

and narrow body-width SO16 package.

The TEA2017AAT digital architecture is based on a high-speed configurable hardware

state machine ensuring very reliable real-time performance. During the power supply

development, many operation and protection settings of the LLC and PFC controller

can be adjusted by loading new settings into the device to meet specific application

requirements. The configurations can be fully secured to prevent unauthorized copying of

the proprietary TEA2017AAT configuration content.

In contrast to traditional resonant topologies, the TEA2017AAT shows a very high

efficiency at low loads due to the LLC low-power mode. This mode operates in the power

region between continuous switching (also called high-power mode) and burst mode.

Because the TEA2017AAT regulates the LLC output voltage of the system via the

primary capacitor voltage, it has accurate information about the power delivered to the

output. This measured output power defines the mode of operation (burst mode, lowpower

mode, or high-power mode). The transition levels of the operating modes can be

easily programmed into the device.

The TEA2017AAT contains all protections like overtemperature protection (OTP),

overcurrent protection (OCP), overvoltage protection (OVP), overpower protection (OPP),

open-loop protection (OLP), and capacitive mode regulation (CMR). Each of these

protections can be configured independently and accurately by programming parameters

inside the device.

The device contains both a low-voltage and high-voltage silicon technology for highvoltage

start-up, integrated drivers, level shifter, protections, and circuitry assuring zerovoltage

switching.

The TEA2017AAT/TEA2095T combination gives an easy to design, highly efficient,

and reliable power supply, providing 90 W to 1000 W, with a minimum of external

components. The system provides a very low no-load input power (< 75 mW; total

system including the TEA2017AAT/TEA2095T combination) and high efficiency from

minimum to maximum load. This power supply meets the efficiency regulations of Energy

Star, the Department of Energy, the Eco-design directive of the European Union, the

European Code of Conduct, and other guidelines. So, any auxiliary low-power supply can

be omitted. To enhance readability, only typical values are given in this document, except in the

parametric tables (Section 9, Section 10, and Section 11). If values in the text differ from

the values for the same parameter in the parametric tables, the values in these tables are

leading.

2 Features and benefits

2.1 Distinctive features

• Complete functionality of a PFC and LLC controller in a single small-size SO16

package

• Integrated high-voltage start-up

• Integrated drivers and high-voltage level shifter (LS)

• High-side driver directly supplied from the low-side driver output

• Accurate boost voltage regulation

• PFC can be configured to operate in:

– DCM/QR

– DCM/QR/CCM (also called multimode operation)

– CCM fixed frequency

• Integrated X-capacitor discharge without additional external components

• Power good function

• PFC jitter for optimized EMI performance

• Excellent power factor (PF) and total harmonic distortion (THD), as the PFC current

compensates for the input filter current

• Several parameters can easily be configured during evaluation with use of the

graphical user interface (GUI), like:

– Operating frequencies to be outside the audible area at all operating modes

– Soft start and soft stop in burst mode, reducing the audible noise

– Accurate transition levels between operation modes (high-power mode/low-power

mode/burst mode)

– Enabling/disabling the lower power mode

2.2 Green features

• Valley/zero voltage switching for minimum switching losses

• Extremely high efficiency from low load to high load

• Compliant with latest energy-saving standards and directives (Energy Star, EuP)

• Excellent no-load input power (< 75 mW for TEA2017AAT/TEA2095T combination)

2.3 Protection features

• Independently configurable levels and timers

• Many protections can independently be set to latched, safe restart, or latched after

several attempts to restart.

• Supply undervoltage protection (UVP)

• Overpower protection (OPP)

• Internal and external overtemperature protection (OTP)

• Capacitive mode regulation (CMR)

• Accurate overvoltage protection (OVP)

• Overcurrent protection (OCP)

• Inrush current protection (ICP)

• Brownin/brownout protection

• Disable input

3 Applications

• Desktop and all-in-one PCs

• Gaming power supplies

• LCD television

• Notebook adapters and general-purpose adapters

• Printers

• Server

• 5G supplies

• UHD LED television

更新时间:2025-6-10 8:01:00
供应商 型号 品牌 批号 封装 库存 备注 价格
恩XP
22+
SMD
574900
恩XP
23+/24+
16-SOIC
8600
只供原装进口公司现货+可订货
恩XP
25+
原厂封装
10280
原厂授权代理,专注军工、汽车、医疗、工业、新能源!
恩XP
2025+
SO-16
57945
ST
23+24
DIP
9860
原厂原包装。终端BOM表可配单。可开13%增值税
ST
24+
DIP-8
200000
原装进口正口,支持样品
ST
25+
DIP-8
16900
原装,请咨询
ST
05+
原厂原装
5021
只做全新原装真实现货供应
ST
24+
DIP-8
100
真实现货库存
ST
24+
原厂封装
4000
原装现货假一罚十

NXP相关芯片制造商

  • NYLENE
  • O2Micro
  • ODU
  • OENINDIA
  • OHHALLSENSOR
  • OHMITE
  • OKAYA
  • OKI
  • OLITECH
  • OMEGA
  • OMNETICS
  • OmniVision