1 General description

The P3T1035xUK/P3T2030xUK is a temperature-to-digital converter from -40 °C to +125 °C range. It uses an on-chip band gap temperature sensor and A-to-D conversion technique with an overtemperature detection. The device contains a number of data registers: Configuration (Conf) stores the device settings such as device operation mode, and temperature register (Temp) stores the digital temp reading, which communicates by a controller via the 2-wire serial I3C/I2C-bus interface. The P3T1035xUK/P3T2030xUK can be configured for different operation conditions. It can be set in normal mode to monitor periodically the ambient temperature, or in shutdown mode to minimize power consumption. The temperature register always stores a 12-bit two's complement data (2 Bytes), giving a temperature resolution of 0.0625 °C. It also allows 8-bit (MSByte) reading with temperature resolution of 1 °C. In I2C mode, the P3T1035xUK/P3T2030xUK supports global read/write operations that allow the controller to access multiple devices simultaneously. It does not require the controller to access each P3T1035xUK/P3T2030xUK individually.

The P3T1035xUK offers the accuracy ±0.5 °C from 0 °C to +70 °C at VCC ≥ 1.62 V.

The P3T2030xUK offers the accuracy ±2 °C from -40 °C to +125 °C at VCC ≥ 1.62 V.

See detailed description of accuracy vs temperature and VCC range in Section 2 and Table 27.

The P3T1035xUK/P3T2030xUK is available in WLCSP4 package and has 8 factory-programmed device address options.

2 Features and benefits

• I3C and I2C interface

• Supply range: 1.4 V to 1.98 V

• Eight different device addresses (A through H) are available

• Programmable undertemperature and overtemperature registers

• Resolution: 12 bits (0.0625 °C); supports 8-bit reading

• Accuracy: P3T1035xUK

– 1.62 V ≤ VCC ≤ 1.98 V

– ±0.5 °C (maximum) from 0 °C to +70 °C

– ±1 °C (maximum) from -40 °C to +125 °C

– 1.4 V ≤ VCC < 1.62 V

– ±2 °C (maximum) from -20 °C to +100 °C

– ±3 °C (maximum) from -40 °C to +125 °C

• Accuracy: P3T2030xUK

– 1.62 V ≤ VCC ≤ 1.98 V

– ±2 °C (maximum) from -40 °C to +125 °C

– 1.4 V ≤ VCC < 1.62 V

– ±2 °C (maximum) from -20 °C to +100 °C

– ±3 °C (maximum) from -40 °C to +125 °C

• Low quiescent current: 6 μA supply current (typical).

• Package: wafer level chip-scale package, 4 terminals, 0.4 mm pitch, 0.91 mm x 0.855 mm x 0.455 mm body

3 Applications

• Portable devices

• IoT

• SSD

• Industrial controllers

• Servers

• PC/notebook