General description

The NTB0101-Q100 is a 1-bit, dual supply translating transceiver with auto direction

sensing, that enables bidirectional voltage level translation. It features two 1-bit

input-output ports (A and B), one output enable input (OE) and two supply pins (VCC(A)

and VCC(B)). VCC(A) can be supplied at any voltage between 1.2 V and 3.6 V. VCC(B) can be

supplied at any voltage between 1.65 V and 5.5 V. It makes the device suitable for

translating between the low voltage nodes (1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V and 5.0 V).

Pins A and OE are referenced to VCC(A) and pin B is referenced to VCC(B). A LOW level at

pin OE causes the outputs to assume a high-impedance OFF-state. This device is fully

specified for partial power-down applications using IOFF. The IOFF circuitry disables the

output, preventing the damaging backflow current through the device when it is powered

down.

This product has been qualified to the Automotive Electronics Council (AEC) standard

Q100 (Grade 1) and is suitable for use in automotive applications.

Features and benefits

 Automotive product qualification in accordance with AEC-Q100 (Grade 1)

 Specified from 40 C to +85 C and from 40 C to +125 C

 Wide supply voltage range:

 VCC(A): 1.2 V to 3.6 V and VCC(B): 1.65 V to 5.5 V

 ESD protection:

 MIL-STD-883, method 3015 Class 2 exceeds 2500 V for A port

 MIL-STD-883, method 3015 Class 3B exceeds 15000 V for B port

 HBM JESD22-A114E Class 2 exceeds 2500 V for A port

 HBM JESD22-A114E Class 3B exceeds 15000 V for B port

 MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 )

 IOFF circuitry provides partial Power-down mode operation

 Inputs accept voltages up to 5.5 V

 Latch-up performance exceeds 100 mA per JESD 78B Class II

 Multiple package options