1. General description

The NXS0101-Q100 is a 1-bit, dual supply translating transceiver with auto direction sensing, that

enables bidirectional voltage level translation. It features one 1-bit input-output port (A and B),

one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A) can be supplied at

any voltage between 1.65 V and 3.6 V and VCC(B) can be supplied at any voltage between 2.3 V

and 5.5 V, making the device suitable for translating between any of the voltage nodes (1.8 V,

2.5 V, 3.3 V and 5.0 V). Pins A and OE are referenced to VCC(A) and pin B is referenced to VCC(B).

A LOW level at pin OE causes the output to assume a high-impedance OFF-state. This device is

fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output,

preventing the damaging backflow current through the device when it is powered down.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100

(Grade 1) and is suitable for use in automotive applications.

2. Features and benefits

• Automotive product qualification in accordance with AEC-Q100 (Grade 1)

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

• Wide supply voltage range:

• VCC(A): 1.65 V to 3.6 V and VCC(B): 2.3 V to 5.5 V

• Maximum data rates:

• Push-pull: 24 Mbps

• IOFF circuitry provides partial Power-down mode operation

• Inputs accept voltages up to 5.5 V

• ESD protection:

• HBM: ANSI/ESDA/Jedec JS-001 Class 2 exceeds 2.5 kV for A port

• HBM: ANSI/ESDA/Jedec JS-001 Class 3B exceeds 8 kV for B port

• CDM: ANSI/ESDA/Jedec JS-002 Class C3 exceeds 1.5 kV

• Latch-up performance exceeds 100 mA per JESD 78B Class II

3. Applications

• Desktop PC

• Handset

• Smartphone

• Tablet